GPON FTTH Fiber Optic Passive Mini Optical Splitter 1*16 900um Single mode SC APC connectors
GPON FTTH Fiber Optic Passive Mini Optical Splitter 1x16 900um Single mode SC APC connectors
Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. Yingda provides whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements.
Optical Fiber Splitter Specification
fiber optic splitter 1xN SPLITTER
| Item | 1x2 | 1x4 | 1x8 | 1x16 | 1x32 | 1x64 | 1x128 | |
| Fiber Type | G.657.A | |||||||
| Working Wavelength | 1260nm~1650nm | |||||||
| Standard Insertion Loss(dB) | ≤4.2 | ≤7.6 | ≤10.7 | ≤14.0 | ≤17.2 | ≤20.8 | ≤24.0 | |
| P-Grade Insertion Loss(dB) | ≤4.0 | ≤7.4 | ≤10.5 | ≤13.8 | ≤17.0 | ≤20.4 | ≤23.7 | |
| Uniformity(dB) | ≤0.6 | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | ≤2.0 | |
| PDL(dB) | ≤0.2 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.4 | ≤0.5 | |
| Wavelength Dependent Loss(dB) | ≤0.6 | ≤0.8 | ≤0.8 | ≤1.0 | ≤1.5 | ≤2.0 | ≤2.0 | |
| Return Loss(dB) | ≥50 | |||||||
| Directivity(dB) | ≥55 | |||||||
| Operating Temp.Gange | -40℃~+85℃ | |||||||
| Note:The above parameter is for Splitter with connector.If w/o connector,insertion loss will reduce by 0.2dB. |
||||||||
Fiber Optic PLC Splitter Features
Ø Low insertion loss, Low PDL and High reliability
Ø High return loss and Good repeatability
Ø Wide wavelength range
Ø Excellent channel-to-channel uniformity
Fiber OpticSplitter Application
Ø LAN, WAN and Metro Networks
Ø FTTH project & FTTX Deployments
Ø CATV System
Ø GPON, EPON
Ø Fiber Optic Test Equipment
Ø Data-base Transmit Broadband Net
All connectors, cable, plc chip is test 100% before in factory. and each with figure ring for better identification on-site constructions.
fiber optic coupler splitterSplitter Fiber Optic Steel Tube size:
| Item | 1×2 | 1×4 | 1×8 | 1×16 | 1×32 | 1×64 |
| Length*Width*Height(mm) | 60×7×4 | 60×7×4 | 60×7×4 | 60×12×4 | 80×20×6 | 100×40×6 |
| Item | 2×2 | 2×4 | 2×8 | 2×16 | 2×32 | 2×64 |
| Length*Width*Height(mm) | 60×7×4 | 60×7×4 | 60×7×4 | 80×12×4 | 100×20×6 | 100×40×6 |
1x16 Passive Optical Fiber PLC Splitter Steel Tube
2x32 splitter Fiber Optic Splitter Order Information
| Port | Fiber | Input Pigtail | Input Connector | Input Pigtail Length |
Output Pigtail | Output Connector |
OutputPigtail Length |
|
| PLC | 102=1x2 104=1x4 108=1x8 116=1x16 132=1x32 164=1x64 128=1x128 204=2x4 208=2x8 216=2x16 232=2x32 264=2x64 |
1=G657A 2=G652D SP=Special |
1=250um Bare Fiber 2=900um tight uffer 3=900um loose tube 4=2.0mm cable 5=3.0mm cable SP=Special |
NE=None SU=SC/UPC SA=SC/APC LU=LC/UPC LA=LC/APC FU=FC/UPC FA=FC/APC SP=Special |
0=0.5m 1=1m 2=1.5m 3=2m 4=3m SP=Special |
1=250um Bare Fiber 2=900um tight uffer 3=900um loose tube 4=2.0mm cable 5=3.0mm cable SP=Special |
NE=None SU=SC/UPC SA=SC/APC LU=LC/UPC LA=LC/APC FU=FC/UPC FA=FC/APC SP=Special |
0=0.5m 1=1m 2=1.5m 3=2m 4=3m SP=Special |
Fiber Optic PLC Splitter Pack Information
PLC splitter,2x2 coupler can be pack in different type, plastic bag like fiber patch cord, blister box, cardboard box, master carton boxes. If without connectors, suggest to use 100pcs in a box so as to make sure good and high protection to fiber and steel tube, due to the huge freight cost increase day by day.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.