FTTH Waterproof Distribution Fiber Optic Splitter Box NAP 8 Cores with LGX Module

GJS-2022 Fiber Optic Splice / Splitter Closure

This splice closure integrates distribution and splitting in one, can realize the direct fusion and branching of the optical cable, and is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection; the unique three-tier design of the box body can be used as a fiber splitter or splice box; the flip board can be flipped≥180°,it is more convenient to install the box or maintenance. If remove the board, it can bed as a splice closure to meet different choices.

                        Splice closure (2 layer)                                          Splitter closure (3 layer)

Features

1. The product is made of high-quality impact resistant plastic and has a standard user interface that can be re-opened.
2. Can accommodate two 1x8 PLC splitter LGX module or steel tube type;
3. Anti-ultraviolet,anti- impact and waterproof function;
4. Unique flip board, flip angle ≥ 180 °, fusion area and distribution area is more obvious, reducing the cable crossing;
5. Fiber optic cable can go in and out of the box without cut the cable.

Technical parameters

1. Optical fiber radius of curvature: ≥40mm
2. Splice tray additional loss: ≤0.1dB
3. Temperature range: -40°C ~ +60°C
4. Anti side pressure: ≥2000N/10cm
5. Impact resistance: ≥20N.m
6. Protection class: IP65

Specification

Product details:

Total box with 3 layers:

the upper layer for splitting, can max. hold 2pcs 1x8 or 1pc 1x16 splitter module

the middle layer is the splice tray for fusion, max. 24cores with 1tray,white color

the bottom is for ditribution of feeder cable from outside, and cable storage and routing.

the whole box is closed with 2 buckles an rubber seal with IP65 grade

The splice tray is fix on the box with screws with stainless teel metal sheet, it is good protection from damage during long transportation and violent handworks. to keep fiber stable and high performance.

the cable port is on the bottom of the box, there are 2round ports at each side of the box, there is one another more for future use, the diameter can be 7-18mm;

 on one side of the box, above the cable ports, there are 16pcs 2*3mm drop cable outputs, it is on the first layer plate with rubber seal, good waterproof, and with cable q6pcs fix slots.

Packing list