LC APC UPC Field Installable Fast Connector Single Mode 2.0*1.6mm Flat Drop Cable
1 Core APC UPC Field Installable Connector Single Mode 2.0*1.6 Mm Flat Drop Cable
LC APC Fast Field Mechanical Connector Optical Fiber Single mode 1 Core 2.0*1.6 mm Flat Drop Cable
LC/APC Fast Field Installation Connector also called Mechanical connector, most people call it fast connector for short. It is a kind of optical on-site connector, used in field wiring operation and FTTH project where need fast and stable connection. Because it has embedded fiber and pre-polished and heat oven ferrule, no need additional glue curing or grinding, thus offer quicker help to installation, maintenance,repair and fiber to the home for engineers.
The pre-embedded fiber and prepolished and cured ferrule ensures the ferrule end face good quality, and effectively protect the
user equipment interface from damage, reduce the connection attenuation loss. This type Metal V Groove ensures the high
performance during high and low temperature.
Specification
| ITEM | Technical Parameters |
| Applicable for | 2.0*1.6mm drop cable, indoor cable 3mm, 1.6mm, 0.9MM, 250um bare fiber |
| Optical fiber diameter | 125μm ( 657A & 657B ) |
| Tight buffer diameter | 250μm |
| Fiber mode | Single mode |
| Operation time | About 100s(no fiber cut) |
| Insert loss | ≤ 0.3dB(1310nm & 1550nm) |
| Return loss | > -45dB |
| Fastening strength of naked fiber | >4 N |
| Fastening strength of naked fiber holder | >8 N |
| Tensile strength | >10 N |
| Using temperature | -40～+75℃ |
| On-line tensile strength (20 N) | △ IL ≤ 0.5dB △ RL ≤ 5dB |
| Mechanical durability (500 times) | △ IL ≤ 0.5dB △ RL ≤ 5dB |
|
Drop-off test (drop-off height 4m, once per direction, totally 3 times) |
△ IL ≤ 0.5dB △ RL ≤ 5dB |
Features
- Do not need hot melt, pre-polished and curing ceramic ferrule, high quality, ensure <0.5dB loss and low return loss.
- Metal V groove, unique design, it can effectively prevent the volatilization of matching gel and prolong the service life
- Good resistance to high and low temperature changes, stable and reliable performance
- Cable stripper length: 15mm coating / 10mm bare fiber
- NOT ONLY USE FOR 2.0*1.6MM, but also for bare fiber 250um. 0.9mm, 3mm round cable.
- Can made any length of fiber optic patch cord on-site
- On-site installation, simple and quick operation, only 2 minutes
- Mechanical and environmental performance conforms to GR-326-CORE standard.
Application
- Fiber Optic Test
- Fiber Optic Distribution Frame use
- FTTH network
- CATV / LAN network
- Fiber Optic Telecommunication system
- Fiber Data Transmission network
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.