Faster injection speed injection molding company Model K2-500
Faster injection speed Variable Pump Injection Molding Machine Model K2-500
Selling points
- More fast cycle:valve panel design in bigger hole with bigger oil pipe.Oil go though the valve more fast flow and the Machine action more goes more faster in mould open and ejector process.
- Material charging more faster:Adopt proportional control for backpressure,can be set in the controller ,more smart and easy operation.when material charging,you can set 0 in the backpressure,so the charging will be more efficient and faster.make sure every shot to be more accurate than manual control type.
- Adopt Techmation newest verison controller which is more fast response ,more output and input can be use for connection the robot in future.
- Hydraulic safty protection installed in both front and rear operation door.when any door is open,the hydraulic system will be shut down to provide more safty protect for the operators.
SPECIFICATIONS
| SPECIFICATIONS | ||||
| DESCRIPTION | UNIT | K2-500 | ||
| INJECTION | A | B | C | |
| SHOT VOLUME | CM3 | 1590 | 2042 | 2550 |
| SHOT WEIGHT | G | 1494 | 1919 | 2397 |
| (PS) | OZ | 52.3 | 67.2 | 83.9 |
| SCREW DIAMETER | MM | 75 | 85 | 95 |
| INJECTION PRESSURE | MPA | 204 | 159 | 127 |
| SCREW L:D RATIO | 21:1 | 21:1 | 18.7:1 | |
| SCREW STROKE | MM | 360 | ||
| SCREW SPEED (STEPLESS) | R/MIN | 0~150 | ||
| CLAMPING UNIT | ||||
| CLAMPING FORCE | KN | 5000 | ||
| OPENING STROKE | MM | 780 | ||
| PLATEN SIZE | MM*MM | 1180*1180 | ||
| SPACE BETWEEN TIE BARS | MM*MM | 830*830 | ||
| MOLD THICKNESS (MIN-MAX) | MM | 300~820 | ||
| MAX.DAYLIGHT | MM | 1600 | ||
| HYDRAULIC EJECTION STROKE | MM | 210 | ||
| HYDRAULIC EJECTION FORCE | KN | 111 | ||
| POWER UNIT | ||||
| HYDRAULIC SYSTEM PRESSURE | MPA | 17.5 | ||
| PUMP MOTOR(V/S) | KW | 45/2*28.3 | ||
| HEATING CAPACITY | KW | 35.4 | ||
| NUMBER OF TEMP CONTROL ZONES | 5+(NOZZLE ) | |||
| GENERAL | ||||
| DRY-CYCLE TIME | SEC | 5.2 | ||
| OIL TANK CAPACITY | L | 1150 | ||
| MACHINE DIMENSIONS | MXMXM | 9.2*1.8*2.4 | ||
| MACHINE WEIGHT | KG | 22000 | ||
IINJECTION UNIT
Double cyllinder injection system
high quality barrel and screw
MUlti stages of speed,pressure and position for injection hold on and charge
postion or time hold on changeover
Scerw position transducer control
prevent the screw cold start
low speed high torque screw drive motor
Nozzle center adjust
Screw RPM show
Stainless steel Hopper
Water cooling for hopper throat
CLRMPLING UNIT
Five points double clamping unit
Transducer for mold open and close position
Mechanical safety device
Multi stage of mold open/close speed,pressure and position
Fast mold close
Automatic mold height adjustment
Low pressure mold protection
Box model platen
Auto centering lubrication system
HYDRRULICS
Variable displacement pump System
Servo System
Oil suck filiter
Oil temperature control and alarm
By-pass oil filter
ELECTRONICS
8.7' lcd solor screen
200sets of mold memory
Barrel temperature monitoring and thermocouple break alarm
System hardware i/o testing function
Interface for printer and floppy drlver
Electric motor safety protection
Emergency stop safeguard device
RCCESSORIES
Adlustable machine leveling pads
Easily damaged spare parts
Professional tools
Manual
OPTIONRL DEVICE
Wide range of injection unit for specific appliaction
Spacific material screw and barrel
Accumulator fast injection
Core pull fittings
Air blast fittings
Glass water regulations
Extended nozzle
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.