KOMEG Technology Ind Co., Limited
                                                                                                           
Verified Supplier
36 Years
Since 1990
Menu

Customized Constant Temperature Walk-In Chamber Room For Stability Test

Price Negotiable
Price: Discussble
MOQ: 1 sets
Delivery Time: 35-100 working days
Brand: KOMEG
Product Description

 
Customized Constant Temperature Walk-In Chamber Room For Stability Test
 
What's your condition:
The size of your installment place:_______________________(W*H*D)M
The longth of your requested cable wire:________________M
Your power voltage:____________________V
Your testing samples:_______________________________________________________
The Calorific value of your testing samples:_________________________________J
 
Thank you!


Optional accessories  
Cable Port: Two size of cable port is available: Φ50mm, Φ100mm.
Double door  
Pass room: Provided to avoid disturbance of atmospheric temperature and humidity while opening the door.
Floor reinforcement: Can be fixed if heavy specimen placed in the chamber for test.
Carry-in inclined platform: Provided below the door to facilitate moving of  specimens in and out through the door.
Entire ceiling blow-out duct  
    The extremely wide air inlet reduces the airflow rate (down to apprrox.0.5m/s)
Dehumidifier  
The rotation regenerating dehumidifier (M-300)ensures precise control of low humidity (21 ºC,23%RH)for electrostatic reliability tests.
Temperature and humidity recorder  
100mm width recording paper with 6 dots
180mm width recording paper with 12 dots
Status indication lamp  
    Provide to signal chamber status and warnings when normal running, a  malfunction running or stand by occurs.
Water purifier  
    Provided to keep the humidifier heater free from scale and ensure the supply of water to humidifier.
Power socket  
Air cooled type condense
 
Main parts brand: Tecumseh, Danfoss, , ALCO,  AC&R, ESK, RANCO, SAGINOMIYA, Castel, etc.
Walk-in Room Available for Constant Temperature and Humidity Test
Walk-in Room Available for Constant Temperature and Humidity Test
Walk-in Room Available for Constant Temperature and Humidity Test
Your company has just developed a great new product, 
and now it is your job to select an environmental test 
chamber to test it and make sure it will hold up.
Komeg has business on reliability test equipment for more than 20years.
KOMEG  is widely recognized and commended bu the top 500comopanies and also customers from electronic, computer, home appliance, communications, chemical industry and scientific reseach.

In 2003, Komeg did the reseach and development of the main equipment with the Pecking University for state key laboratory of environment and pollution simulation(located in Shenzhen HIgh-Tech Park, and funded by national natural science foundation.)

 

After-sale service  
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.

 

Specification of Walk-In Chambers
ModelKMHW-13
Volume(m³)16.8CBM
Interior DimensionsW3000*H2100*D4300mm
Exterior DimensionsW5050*H2350*D2250mm
Safety Devices(standard)

No fuse breaker, over pressureover heat and over current protection
for compressor, over temperature protection, over load protection for blower, 
dry heat protection

Standard accessoriesSight window*1,cable port(portΦ50mm)*1,chamber lamp*1, status indicator
Control System Balanced Temperature & Humidity Control System
Refrigeration systemWater Cooled
Semi-hermetic compressor, single stage or cascade refrigeration system,
CFC free refrigerant(HFC-507 and HFC-23)
ControllerPanel7-inch LCD Touch panel,Chinese or English display selectable
Operation modelProgram or fix point running
Memory capacity120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles
AccuracyTemp.:0.1% of F.S±1 digit  Humidity:0.1% of F.S±1 digit
InputTemp.:pt-100, Humidity:pt-100 or ~5V DCV
Comm.port RS-232 or RS-485 (Softawre is option)
Temp. rangeMaximum:80ºC,120ºC;Minimum:-60ºC,-50ºC,-40 ºC,-30ºC,-20 ºC,-10ºC,0ºC
Humidity Range10%,20%,30%~95%
Temp. constancy±0.5ºC
Humidity constancy±2.5%R.H
Temp. uniformity±2.0ºC
Humidity uniformity±5.0%R.H
Ambient Temp.+5ºC~+35ºC
Wiring methodAC 380±10%50Hz ,3 phase 4 wires +Ground Wires
Heat up time +20ºC~+80ºC,Within 60 min
Pull down time +20ºC~-55ºC-40ºC-20ºC-10ºC,Within 120 or 90 or 60  min
Interior materialStainless Steel Plate(SUS 304)
Exterior materialBaked Painting Steel Or Stainless steel(SUS304)
Insulation materialRigid polyurethane foam
Door size (mm)Single wing:W800*H1800;Double wing:W1600*H1800;
Note:1. We reserve the right to change specifications without prior notice   2.Customized sizes and configurations available
 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company KOMEG Technology Ind Co., Limited
Location Building 12, Songshan Lake, Small and Medium-Sized Science and Technology Park, Dongguan City, 523808, Guangdong Province, P.R.China
Contact Person KOMEG

Request A Quote

Please check your email address.
Your message must be at least 20 characters.