Refrigeration Pressure Gauges Walk-In Chamber with Temperature Recorders
Exellent User Convenience & Flexibility Control Walk-In Chamber with Temperature Recorders
Walk-In Chambers Customized to Meet Your Needs
A variety of options are available for enhanced performance and combined environments with custom configurations designed to meet your specific requirements.
Standard Features
Modular Panel or Welded Construction
Stainless Steel Interior
Safety Release Latches
Heated Windows
Vapor Proof Interior Lights
KM-5166 Programmable Controller
Temperature Limit & Alarm
RS-232/485 Computer Interface
Solid State Humidity Sensor*
Refrigeration High Temperature
Protection
Refrigeration Pressure Gauges
Compressor Overload Protection
Refrigeration Service Taps
Water-Cooled Condenser
Zero Ozone Depletion Refrigerants
High and Low Pressure
Switches (3HP & Over)
Humidity Units Only
Optional Accessories & Custom Capabilities
Access Ports
Additional/Oversize Doors
Automatic Door Operation
Entry Ramp
Reinforced Treaded Floor
Remote Refrigeration System
Explosion-Proof Electrical
LN2/CO2 Boost Cooling
Ultra Low Temperature
Ultra High Temperature
Custom Control Interface
Reverse Osmosis Water System
Dry Air Purge System
Windows-Based Software
Redundant Temp. Limit & Alarm
IEEE-488 Computer Interface
Running Time Meter
50 Hz. Operation
Temperature Recorders
Electrical Disconnect Switch
Remote Instrument Console
Hydro Carbon/Carbon
Monoxide Monitor
Refrigeration Sound
Deadening Package
Extended Relative
Humidity Range
Compliance to Special
Wiring Standards
Internal or External
Emergency Stop Switch
Humidity Units Only
Certain options not available
on stability rooms
Walk-In Chamber Types Knowledge:
| Model | Temperature Range | Humidity Range | Temperature Change rate | Recommended Test / Application |
| Panel Walk-in Chamber | -60°C to +85°C | 20% to 95%RH | 1 to 2°C/min | Temperature Cycling Temp / Humidity Cycling / Storage Testing |
| Solid Walk-In Chamber | -60°C to +150°C | 20% to 95%RH | 4 to 5°C/min, or faster | Temperature Cycling Temp / Humidity Cycling Extreme Temp / Humidity Testing Altitude Testing |
| Steady State Walk-In Chamber | -20°C to +50°C | 20% to 95%RH | N/A | Constant Temperature Constant Temp / Humidity Storage Testing |
Walk-In Chamber Main Technical Parameters
| Model | KMHW-17 | |||||||
| Volume(m³) | 35.2CBM | |||||||
| Interior Dimensions | W3900 x H2100 x D4300mm | |||||||
| Exterior Dimensions | W5050 x H2350 x D4500mm | |||||||
| Safety Devices(standard) | No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection | |||||||
| Standard accessories | Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator | |||||||
| Control System | Balanced Temperature & Humidity Control System | |||||||
| Refrigeration system | Water Cooled | |||||||
| Semi-hermetic compressor, single stage or cascade refrigeration system, | ||||||||
| CFC free refrigerant ( HFC-507 and HFC-23 ) | ||||||||
| Controller | Panel | 7-inch LCD Touch panel, Chinese or English display selectable | ||||||
| Operation model | Program or fix point running | |||||||
| Memory capacity | 120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles | |||||||
| Accuracy | Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit | |||||||
| Input | Temp.: pt-100, Humidity: pt-100 or ～5V DCV | |||||||
| Comm.port | RS-232 or RS-485 ( Softawre is option) | |||||||
| Temp. range | Maximum: 80 ºC,120 ºC; Minimum: -60 ºC, -50 ºC, -40 ºC, -30 ºC, -20 ºC, -10 ºC, 0 ºC |
|||||||
| Humidity Range | 10%, 20%, 30% ~ 95% | |||||||
| Temp. constancy | ±0.5 ºC | |||||||
| Humidity constancy | ±2.5%R.H | |||||||
| Temp. uniformity | ±2.0 ºC | |||||||
| Humidity uniformity | ±5.0%R.H | |||||||
| Ambient Temp. | +5 ºC～+35 ºC | |||||||
| Wiring method | AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires | |||||||
| Heat up time | +20 ºC～+80 ºC, Within 60 min | |||||||
| Pull down time | +20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min | |||||||
| Interior material | Stainless Steel Plate(SUS 304) | |||||||
| Exterior material | Baked Painting Steel Or Stainless steel ( SUS304) | |||||||
| Insulation material | Rigid polyurethane foam | |||||||
| Door size (mm) | Single wing: W800 x H1800; Double wing: W1600 x H1800; | |||||||
| Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available | ||||||||
Widest test range, most customizable
The description is sourced from komegtech.com, for more detailes please refer to our website.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.