Electric Power Programmable Altitude Test Chamber For Industrial Products Test
Electric power industrial products test usage programmable low air pressure test equipment/ high altitude equipment
High low temp. low pressure control equipment/Altitude test camera simulates reliable storage and transportation climate of high altitude, sky, plateau area and low pressure high low temperature, it is applied to defense industry, aerospace industry automation components, auto parts, electronics, electrical components, plastic, chemical industry, pharmaceutical industry, food industry and other related products.
- High efficiency Temperite Type Oil Separator
- TEMI-300 Programmable LCD Controller
- RS-485 Communication Port/Connector
- Vane Type Sirocco, L134, Fan
- SUS #304 Stainless Steel, PT 100 Ω, Temp-Hum Sensors (2)
- Fin Heat Disperse-Stainless Steel Heater
- PID controlled-Stainless Steel Humidifier
Feature
1. User-friendly touch-screen operation
2. Operation data can be downloaded as needed, or continually via communication port RS-232/485, USB
3. System alarms are stored in memory for historical review
4. Built-in timer functions allow the chamber to be started or shut down automatically
5. Control fluctuation of ±0.2°C and ±0.5% RH after stabilization
6. Double silicon gaskets on doors
Structure:
Overall structure, new test chamber designed very easy to operation and maintenance:
Water and electricity system separation design;
External humidifying design;
Three levels of overheat protection, easy access for refrigeration servicing, etc.
Material:
machines for sheet metal processing;
Tecumseh, Bock Compressor;
High quality electronic components (e.g. DANFOSS, ALCO, RANCO, SPORLAN, SAGINOMIYA, Schneider solenoid valve)
Test standards our high altitude test chamber comply with:
- GB/T 10590-2006 low temperature low pressure test
- MIL-STD883 Method 1004.2 high low temperature cycle test
- GB10592-89 Technical conditions for high and low temperature testing box
- GB/T2423.1-2001 Low-temperature testing methods
- IEC60068-2-1.1990 Low-temperature testing method
- IEC60068-2-2.1974 High-temperature testing method
- GJB150.3 High-temperature testing
- GJB150.4 Low-temperature testing
- GB/ T 2423.21- 1991 Test M low pressure test method
- GB/ T 2423.26- 1992 Test Z BM high temperature/low pressure test method
- MIL-STD810 Method 507.2
| Specifications | KOMEG | ||||
| Model | KU-504L | KU-1000L | KU-504S | KU-1000S | |
| Inner Size (D*W*H)mm | 800*700*900 | 1000*1000*1000 | 800*700*900 | 1000*1000*1000 | |
| Capacity(KW) | 11 | 15 | 16 | 18 | |
| Chamber Volume(L) | 504 | 1000 | 504 | 1000 | |
| Performance | Temp range | -40℃~+150℃ | -70℃~+150℃ | ||
| Temp constancy | ±0.5% | ||||
| Temp deviation | ≥100℃, ±3.0℃(at constant pressure with empty load) | ||||
| <100℃, ±2.0℃(at constant pressure with empty load) | |||||
| Cooling rate | 0.7℃~1.0℃/min(Overall average) | ||||
| Pressure range | Constant pressure ~1kPa | ||||
| Pressure constancy | When ≥40kPa, ±2kPa, 4kPa~40pKa ±0.5kPa, when≤4kPa, ±0.1kPa | ||||
| Depressurization rate | Constant pressure~1kPa≤30mins(Normal temp) | ||||
| Pressure recovery rate | 10kPa/Min(adjustable) | ||||
| Material | Exterior material | Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate | |||
| Interior material | Stainless steel(SUS304) | ||||
| Pressurized parts | High quality steel plate(Rust proof & Plastic spray treated) | ||||
| Insulation material | High quality glass wool | ||||
| Cooling System | Compressor | Semi-Hermetic Compressor | |||
| Cooling Mode | Water cooled | ||||
| Temp regulating method | Balanced Temperature & Humidity Control System (BTHC) | ||||
| Pump | Rotary vane type vacuum pump | ||||
| Heater | Iron-chrome wire heater | ||||
| Sight window | Circular viewing glass incorporating heat generator | ||||
| Temp Sensor | Pt-100 | ||||
| Controller | Touch Screen Controller | ||||
| Safety Devices | Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower, Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm | ||||
| Standard Accessory | Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2 | ||||
| Power | AC380V/50Hz, 3Phase 5 wires+ Ground Wire. | ||||
| Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available |
|||||
Altitude chamber working principle
Temperature and pressure range chart
With our high altitude test chamber, you can:
- Shorten product development period
- Increase the confidence and loyalty from your users.
- Ensure product quality and reliability
- Forecase life expectancy
- Reduce costs
- Increase profitability
- Reduce after sales service
After-Sales Service
* If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Programmable Temperature & humidity testing Chamber
Air Thermal Shock Tester
Thermal Shock Tester
Salt Spray Tester
Walk In environmental Testing Room
Temperature & humidity & Vibration Combined Testing Chamber
Aging Oven Tester
Rain/Spray Testing Chamber
Burn-in testing equipment
Dust Tester, Steam Aging Tester
Dispensing Robots
Electromagnetic High Frequency Vibration Tester
Precision Oven Tester, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.