Automatic High Altitude Chamber Low Pressure Test Chamber For Temperature Humidity
Automatic High Altitude Low Pressure Test Chamber For Temperature Humidity
Description
KOMEG altitude test chamber offers performance flexibility and reliability for mixed-environmental testing requirements by controlling the temperature environment for testing while also simulating various altitudes.
Altitude simulation testing is important for manufacturers of products that might be shipped via air, especially important for defense and aerospace applications where pressure and vacuum conditions are even more intense.
| specifications | ||
| Model | KU-4500S | |
| Inner Size (D*W*H)mm | 1500D*1500W*2000H | |
| Capacity(KW) | 15 | |
| Chamber Volume(L) | 4500 | |
| Performance | Temp range | -70ºC~+150ºC |
| Temp constancy | ±0.5% | |
| Temp deviation | ≥100ºC, ±3.0ºC(at constant pressure with empty load) | |
| <100ºC, ±2.0ºC(at constant pressure with empty load) | ||
| Cooling rate | 0.7ºC~1.0ºC/min(Overall average) | |
| Pressure range | Constant pressure ~1kPa | |
| Pressure constancy | When ≥40kPa, ±2kPa, 4kPa~40pKa ±0.5kPa, when≤4kPa, ±0.1kPa | |
| Depressurization rate | Constant pressure~1kPa≤30mins(Normal temp) | |
| Pressure recovery rate | 10kPa/Min(adjustable) | |
| Material | Exterior material | Cold-rolled steel sheet(Rust proof&Plastic Spray treated)/Stainless Steel plate |
| Interior material | Stainless steel(SUS304) | |
| Pressurized parts | High quality steel plate(Rust proof & Plastic spray treated) | |
| Insulation material | High quality glass wool | |
| Cooling System | Compressor | Semi-Hermetic Compressor |
| Cooling Mode | Water cooled | |
| Temp regulating method | Balanced Temperature & Humidity Control System(BTHC) | |
| Pump | Rotary vane type vacuum pump | |
| Heater | Iron-chrome wire heater | |
| Sight window | Circular viewing glass incorporating heat generator | |
| Temp Sensor | Pt-100 | |
| Controller | Touch Screen Controller | |
| Safety Devices | Over pressure, over heat and over current protection for compressor, over temp. protection, over load protection for blower,Hydraulic and Water lack Protection, leakage protection, phase-lack protection, Pump failure alarm | |
| Standard Accessory | Sight window, Cable Port( 1 located on the left side), Baffle, Baffle frame*2 | |
| Power | AC380V/50Hz, 3Phase 5 wires+ Ground Wire. | |
| Note: 1. We reserve the right to change specifications without prior notice; 2. Customized sizes and configurations available |
||
Test standards our high altitude test chamber comply with:
- GB/T 10590-2006 low temperature low pressure test
- MIL-STD883 Method 1004.2 high low temperature cycle test
- GB10592-89 Technical conditions for high and low temperature testing box
- GB/T2423.1-2001 Low-temperature testing methods
- IEC60068-2-1.1990 Low-temperature testing method
- IEC60068-2-2.1974 High-temperature testing method
- GJB150.3 High-temperature testing
- GJB150.4 Low-temperature testing
- GB/ T 2423.21- 1991 Test M low pressure test method
- GB/ T 2423.26- 1992 Test Z BM high temperature/low pressure test method
- MIL-STD810 Method 507.2
- Main Features of our high altitude test chamber:
-
1. 5.6" LCD touch screen color controller, Korea Samvontech brand.
2. 120 patterns*1200 steps, circulation Setting: Max. 9999 cycles.
3. PID+SSR / SCR controller.
4. RS-232 / RS-485 / USB / Ethernet / RJ45 communication interface.
5. Pressure range: atmosphere pressure to 0.5KPa
6. Inner cable port of 50mm/100 mm can meet the requiremnt of power- on test for user's product.
7. SUS#304 stainless steel plate inner chamber.
8.1 year free parts warranty, extended warranty is also available.
Pre-Sales Service
* Inquiry and consulting support.
* Sample testing support.
* Visiting our factory is highly welcomed.
After-Sales Service
* If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.
Programmable Temperature & humidity testing Chamber
Air Thermal Shock Tester
Thermal Shock Tester
Salt Spray Tester
Walk In environmental Testing Room
Temperature & humidity & Vibration Combined Testing Chamber
Aging Oven Tester
Rain/Spray Testing Chamber
Burn-in testing equipment
Dust Tester, Steam Aging Tester
Dispensing Robots
Electromagnetic High Frequency Vibration Tester
Precision Oven Tester, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.