Cascade Refrigeration System Programmable Thermal Shock Test Chamber with Cooling Tower

Product Introduction:

Impact Thermal Shock Chamber Climatic Chamber can be used to test the structure of materials or to test the tolerance level of composite materials at the moment of extremely high temperature and extremely low temperature continuous environment to test its chemical changes or physical damages caused by heat-expansion and cold-contraction in the shortest possible time. The applicable materials include metal, plastic, rubber, electronics, and so on which can be used as a basis or reference for improving its products.

Features:

1. Perfect appearance and easy to operate.

2. Japan LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.

3. Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable.

4. Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…

5. Control interface will display alarm reason and provide check methods, machine has emergency stop button.

6. Cold and hot shock temperature recover within 5 minutes, which complies with MTL, IEC, JIS, GJB and other international standards.

7. With RS-232C communication port for connecting PC to control, record and save test report.

Specifications

(1) KTS-A Series

(2) KTS-B Series

(3) KTS-D Series

High temperature chamber:

Heater: NI-CR alloy electric heater

Draught fan: Share centrifugal fan when high temperature and do environmental temperature, preheating with axial flow fan.

Low temperature chamber:

Cooler: Fin cooler, regenerator

Draught fan: centrifugal fan

Drive device:

Pneumatic cylinder: Drive the air door of high, environmental, low temperature

Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)

Refrigerating device:

Cooling method: mechanical compression refrigeration

Refrigeration compressor: Semi-closed piston

Refrigerant: R23/R404A

Condensation: Stainless steel welded plate heat exchanger

Controller:

Operate interface: 7" color LCD touch screen

Program memory capacity: 100 groups (modify by operator)

Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 999 cycles

Resolution: temperature: 0.01 ℃; time: 1 minute

Input: T thermocouple

Control method: P.I.D control

Additional functions:

Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time

Circulated cooling water: pressure: 0.2~0.4MPa, temperature: ≤30℃

Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.

Safety devices:

Leakage and breaker, over temperature, low temperature protect device, exhaust valves, sample power control terminal, over temperature protection of high and low chamber, compressor over pressure, over heat protection, out of water relay, heat relay of fan, compressed air pressure switch, fuse, external alarm terminal

How to install and use the product?

We will send you operating instructions, English video by Email. Or you can download on our officail website directly.

Most of our machine is shipped with a whole part, which means it is already installed, all you need to do is to connect the power cable and start to use. And if possible, we can also install your machine at site.