Hot / Cold Ambient Temperature Climatic Thermal Shock Test Chamber For Medicine
A Vertical Orientation Thermal Shock Chamber has two independently controlled hot and cold zones; one
atop the other. A single product carrier moves between each zone, subjecting the product to dramatic
changes in temperature. An advantage of the Vertical Orientation chamber is it uses less floor space,
making it ideal for smaller labs.
Thermal shock testing subjects a product to alternating extremes of high and low temperatures in order to
observe changes in the product’s characteristics and failure occurrences caused by different materials and
thermal expansion.
A product transfer mechanism automatically transfers products under test from zone-to-zone programmed
in the controller.
Specifications:
|
2 Zone Thermal Shock Test Chamber IN THE BLANKET:
|
||||||
|
Specifications
|
||||||
| Model |
TST-A Series
|
|||||
| 72A | 130A | 226A | 360A |
500A
|
||
| Test weight(KG) | 410 | 520 | 610 | 710 |
810
|
|
| Interior size | W(mm) | 560 | 670 | 770 | 830 |
710
|
| H(mm) | 410 | 520 | 610 | 770 |
860
|
|
| D(mm) | 300 | 410 | 510 | 610 |
710
|
|
| Basket size | W(mm) | 300 | 410 | 510 | 730 |
610
|
| H(mm) | 300 | 410 | 510 | 510 |
730
|
|
| D(mm) | 5 | 5 | 5 | 5 |
10
|
|
| Low Temp. chamber |
-55 °C~ -10°C
|
|||||
| Pre-cooling time |
+20 °C~ -55°C ,Within 60 min
|
|||||
| Test. chamber |
-40 °C~ +150°C
|
|||||
| High Temp. chamber |
+60 °C~ +200 °C
|
|||||
| Pre-heating time |
+60°C~ +200°C ,Within 25 min
|
|||||
| Recovery time |
High-Temp Exposure 30 min
|
|||||
|
Low-Temp Exposure 30 min
|
||||||
|
Recovery time within 5 min
|
||||||
| Safety device |
within 10 seconds
|
|||||
| Standard accessory |
No fuse breaker, over pressure over heat and over
current protection for compressor,
|
|||||
| Interior material |
Cable port(portΦ50mm)*1, shelves*2
|
|||||
| Exterior material |
Stainless steel plate ( SUS 304 )
|
|||||
| Insulation material |
Baked painting steel or stainless steel(SUS304)
|
|||||
| Refrigeration system |
Rigid polyurethane Foam glass fiber wool
|
|||||
|
Water Cooled
|
||||||
| Controller |
Panel:7-inch LCD Touch panel , Chinese or English
display selectable |
|||||
|
Operation model:Program or fix point running
|
||||||
|
Memory capacity:120programs,1200steps ,
|
||||||
|
Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
|
||||||
|
Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV
|
||||||
| Ambient Temp. |
+5 °C~ +35 °C (41 ~ 95°F)
|
|||||
| Power |
AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires
|
|||||
|
Note:1. We reserve the right to change specifications without prior notice
|
||||||
|
ALL THE MODEL OF THIS KIND PRODUCTS IN THE BLANKET:
|
||||||
|
Specifications
|
||||||
| Model |
TST B Series
|
|||||
| 72B | 130B | 226B | 360B |
500B
|
||
| Test weight(KG) | 410 | 520 | 610 | 710 |
810
|
|
| Interior size | W(mm) | 560 | 670 | 770 | 830 |
710
|
| H(mm) | 410 | 520 | 610 | 770 |
860
|
|
| D(mm) | 300 | 410 | 510 | 610 |
710
|
|
| Basket size | W(mm) | 300 | 410 | 510 | 730 |
610
|
| H(mm) | 300 | 410 | 510 | 510 |
730
|
|
| D(mm) | 5 | 5 | 5 | 5 |
5
|
|
| Low Temp. chamber |
-70 °C~ -10°C
|
|||||
| Pre-cooling time |
+20°C~ -70 °C ,Within 60 min
|
|||||
| Test. chamber |
-55°C~ +150°C
|
|||||
| High Temp. chamber |
+60 °C~ +200 °C
|
|||||
| Pre-heating time |
+60°C~ +200°C ,Within 25 min
|
|||||
| Recovery time |
High-Temp Exposure 30 min
|
|||||
|
Low-Temp Exposure 30 min
|
||||||
|
Recovery time within 5 min
|
||||||
| Safety device |
within 10 seconds
|
|||||
| Standard accessory |
No fuse breaker, over pressure over heat and over current protection for
compressor, over temperature protection, over load protection for blower, dry
heat protection |
|||||
| Interior material |
Cable port(portΦ50mm)*1, shelves*2
|
|||||
| Exterior material |
Stainless steel plate ( SUS 304 )
|
|||||
| Insulation material |
Baked painting steel or stainless steel(SUS304)
|
|||||
| Refrigeration system |
Rigid polyurethane Foam glass fiber wool
|
|||||
|
Water Cooled
|
||||||
| Controller |
Panel:7-inch LCD Touch panel , Chinese or English display selectable
|
|||||
|
Operation model:Program or fix point running
|
||||||
|
Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles.
|
||||||
|
Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
|
||||||
|
Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV
|
||||||
| Ambient Temp. |
+5 °C~ +35 °C (41 ~ 95°F)
|
|||||
| Power |
AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires
|
|||||
|
Note:1. We reserve the right to change specifications without prior notice
|
||||||
|
ALL THE MODEL OF THIS KIND PRODUCTS IN THE BLANKET:
|
||||||
|
Specifications
|
||||||
| Model |
TST D Series
|
|||||
| 72D | 130D | 226D | 360D |
500D
|
||
| Test weight(KG) | 410 | 520 | 610 | 710 |
810
|
|
| Interior size | W(mm) | 560 | 670 | 770 | 830 |
710
|
| H(mm) | 410 | 520 | 610 | 770 |
860
|
|
| D(mm) | 300 | 410 | 510 | 610 |
710
|
|
| Basket size | W(mm) | 300 | 410 | 510 | 730 |
610
|
| H(mm) | 300 | 410 | 510 | 510 |
730
|
|
| D(mm) | 5 | 5 | 5 | 5 |
10
|
|
| Low Temp. chamber |
-80 °C~ -10 °C
|
|||||
| Pre-cooling time |
+20 °C~ -80°C ,Within 60 mins
|
|||||
| Test. chamber |
-60°C~ +150 °C
|
|||||
| High Temp. chamber |
+60 °C~ +200 °C
|
|||||
| Pre-heating time |
+60°C~ +200°C ,Within 25 min
|
|||||
| Recovery time |
High-Temp Exposure 30 min
|
|||||
|
Low-Temp Exposure 30 min
|
||||||
|
Recovery time within 5 min
|
||||||
| Safety device |
within 10 seconds
|
|||||
| Standard accessory |
No fuse breaker, over pressure over heat and over current protection for
compressor, over temperature protection, over load protection for blower, dry
heat protection |
|||||
| Interior material |
Cable port(portΦ50mm)*1, shelves*2
|
|||||
| Exterior material |
Stainless steel plate ( SUS 304 )
|
|||||
| Insulation material |
Baked painting steel or stainless steel(SUS304)
|
|||||
| Refrigeration system |
Rigid polyurethane Foam glass fiber wool
|
|||||
|
Water Cooled
|
||||||
| Controller |
Panel:7-inch LCD Touch panel , Chinese or English display selectable
|
|||||
|
Operation model:Program or fix point running
|
||||||
|
Memory capacity:120programs,1200steps , all repeat 999cycles , part repeat 99 cycles.
|
||||||
|
Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
|
||||||
|
Input:Temp.:pt-100 Humidity:pt-100 or ~ 5V DCV
|
||||||
| Ambient Temp. |
+5 °C~ +35 °C (41 ~ 95°F)
|
|||||
| Power |
AC 380±10 % 50Hz ,3 phase 4 wires +Ground Wires
|
|||||
|
Note:1. We reserve the right to change specifications without prior notice
|
||||||
Photos show
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.