Laboratory Vacuum Drying Equipment With Digital Display / Control CE Approved
Laboratory Vacuum Drying Equipment With Digital Display / Control CE Approved
Application
Lab vacuum oven have become very popular in recent times and specifically vacuum heat-treating is mandatory for parts that are manufactured without surface damage like oxidation. Rapid heating and cooling allows operators to quickly cycle through materials which greatly benefits the efficiency of the entire manufacturing process. By having absolute control of the temperature levels inside the vacuum oven then manufacturers can guarantee a higher level of quality assurance. The vacuum range is room pressure~-98Kpa, adjustable.
Key Specifications/Special Features:
-
Rated power: 2,200VA, ±10%
-
Temperature control range: 50 to 200℃
-
Temperature fluctuation: ±1℃
-
Vacuum degree: <133Pa
-
Operating room dimension: 56 x 60 x 64cm
-
Overall dimension: 72 x 82 x 175cm
-
Packing size: 89 x 92 x 193cm
-
Net/gross weight: 215/275kg
-
Application range:
- This type of product is suitable for research institutes, hospitals and mining industries.
- It specializes in the drying of heat-sensitive, easily oxidized and disintegrated substances, and can quickly dry product made of complex substances. The studio can be filled with noble gas
-
Structural characteristics
-
The microcomputer intelligent temperature controller is accurate and reliable
-
The heater controls temperature respectively is installed on the shelves in the dryer, it's heating takes less time and has a good uniformity
-
Studio is made of stainless steel plate and polished to ensure aesthetics and durability
-
The door is made of steel bulletproof double glass to ensure the safety of operator
-
The door seal is made of overall shape silicone rubber to ensure a high vacuum in the chamber. The tightness of the seal can be adjusted and the studio can be filled with noble gas
-
Vacuum uses microcomputer program to control digital display. The max program cycle can up to 99 times
-
Technical parameter
| Specifications of drying oven | |||||
| Model | KOV-50 | KOV-100 | KOV-200 | KOV-290 | KOV-500 |
| Interior size (W*H*D)mm | 400*350*350 | 450*500*450 | 600*600*600 | 600*950*500 | 800*1050*600 |
| Exterior size (W*H*D)mm | 1010*650*760 | 1110*800*1100 | 1260*900*1100 | 870*1590*640 | 1160*1760*880 |
| Capacity(KVA) | 3.5 | 3.5 | 4.5 | 4.5 | 6 |
| Power | AC220V±10% 1Φ 50Hz/60Hz | AC 380V±10% 3Φ4wire 50Hz/60Hz | |||
| Temp. range | 50 ºC~ 200 ºC( 300 ºC) | ||||
| Temp. constancy | ±1.0 ºC | ||||
| Temp. uniformity | ±2.0 ºC( 50 ºC~ 200ºC ) ±3.0 ºC( 101 ºC~ 200 ºC) | ||||
| Heat up time | 50 ºC to 200 ºC within 50 min | ||||
| Interior material | Stainless steel plate | ||||
| Exterior material | Painted Stainless steel plate | ||||
| Insulation material | Glass wool | ||||
| Safety devices | No fuse breaker, over temp protection, ceramic fuse | ||||
| Accessories | Recorder, insolating layer | ||||
|
Note: 1. We reserve the right to change specifications without prior notice |
|||||
|
specifications
|
||||
|
Model
|
KOV-600 | KOV-720 | KOV-1000 | KOV-1800 |
| Interior size (W*H*D)mm | 1000*1000*600 | 900*1000*800 | 1000*1000*1000 | 1600*1400*600 |
| Exterior size (W*H*D)mm | 1360*1720*880 | 1300*1750*1000 | 1300*1750*1000 | 1600*1940*1200 |
| Capacity(KVA) | 6.5 | 7.5 | 8.5 |
9.5
|
| Power |
AC 380V±10% 3Φ4wire 50Hz/60Hz
|
|||
| Temp. range |
50 ºC~ 200 ºC( 300 ºC)
|
|||
| Temp. constancy |
±1.0 ºC
|
|||
| Temp. uniformity |
±2.0 ºC( 50 ºC~ 200ºC ) ±3.0 ºC( 101 ºC~ 200 ºC)
|
|||
| Heat up time |
50 ºC to 200 ºC within 50 min
|
|||
| Interior material |
Stainless steel plate
|
|||
| Exterior material |
Painted Stainless steel plate
|
|||
| Insulation material |
Glass wool
|
|||
|
Safety devices
|
No fuse breaker, over temp protection, ceramic fuse | |||
|
Accessories
|
Recorder, insolating layer | |||
|
Note: 1. We reserve the right to change specifications without prior notice
|
||||
Big Reasons to Buy
1. We appreciate you, the customer, and we always treat our customers with the greatest consideration and courtesy.
2. We'll be here tomorrow. Our business has been headquartered in Shenzhen, Dongguan for over twenty years. We are one of the largest independant environment test equipment manufacturers in China.
3. We'll do our best to remedy any problem you might have with a purchase. We are old fashioned in our customer service; We believe we have an obligation to give you our best if you purchase from us.
4. Your order will be filled accurately and shipped promptly. We have thousands of parts in stock. We have been selling by email order for over fifteen years.
5. You won't pay too much. Our volume buying and low overheads assures you of a low price and top quality new products.
If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service:
12 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller.
3.Commitment:
We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Contact
If you are interest in our product and want to know more details about it, please kindly contact Bella Mo via e-mail bella@komegtech.com or our web www.komegtech.com . Welcome to enquire and visit us. ,we are honored to serve you.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.