Photovoltaic module constant temperature and humidity test chamber meets
 
1. GB/T 19394.-2003 test;
 
2. GB/T9535.-1998 test;
 
3. GB/T6492-1986, GB/T6494,
 
4.GB/T6497, SJ/T2196;
 
5.IEC61345-1998; IEC61646,
 
6. IEC61215, etc. National standards, as well as other relevant standards.
7. Strictly according to GB 10592-89 "Technical Conditions for High and Low Temperature Test Chambers
 
8. GB 10586-89 "Damp Conditions for Hot and Cold Test Chambers" for design and manufacture,
 
9. Conforms to IEC61215-2005 temperature. The corresponding standard parameters for damp heat can
 
be used for various high and low temperature heat and humidity alternating environments.
 
10. Solar Solar: IEC61215, UL1703, GB9535
11.Thin-film solar energy: IEC61646, GB18911
 
Main Material List imported from famous brand 
 

 
Features
 
Photovoltaic module constant temperature and humidity test chamber meets the test index
1. Thermal cycle test
Photovoltaic modules circulate between -40°C±2°C and 85°C±2°C in a test space where the wind speed
 
is not less than 2m·S-1.
2. Wet - cold (frozen) test
Place the PV module in the environmental chamber at room temperature and complete 10 cycles. The
 
maximum and minimum temperatures shall be within ±2°C of the set value, and at any temperature above
 
room temperature, the relative humidity shall be maintained within ±5%R·H of the set value.
 

Photos show