Walk In Stability Climatic Test Chamber For Defense Industry , Aerospace Industry , Automation Components
Walk in stability Climatic Aging Test Chamber for Vehicle driving test
KOMEG Walk In Environmental Chamber is consist of Control Panel, electrical panels, moisturizingplate blower,heater,humidifier, freezer. It provides a large spare to test the temperature and humidityfor large-scaleparts,semi-finished products, it applied to test products that large-scale or the quantity, such as: computer terminals,vehicle parts.
GB-2423. 1-89(IEC68-2-1) Test A: Low Temperature Test
GB-2423. 2-89(IEC68-2-2) Test B: High Temperature Test
GJB360. 8-87(MIL-STD．202F) High Temperature Operating Life Test
GBJl50. 3(MIL-STD-810D) High Temperature Test
GJBl50. 4(MIL-STD-810D) Low Temperature Test
GB2423. 3-93(IEC68-2-3) Test Ca: method for steady-state damp heat test
GB2423. 4-93(IEC68-2—30) Test Db: Damp Heat Alternative Test
GJBl50. 9-93(MIL-STD-810D) Damp Heat Test
|
Model |
KMHW-36(walk-in room) (Customize is acceptable) |
|||||||
|
Volume(m³) |
36CBM |
|||||||
|
Interior Dimensions |
W 2500 × H2200 × D 5000 mm |
|||||||
|
Exterior Dimensions |
W 3550 × H 3300 × D 7400 mm |
|||||||
|
Safety Devices(standard) |
No fuse breaker, over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection |
|||||||
|
Standard accessories |
Sight window*1, cable port ( portΦ50mm ) *1, chamber lamp*1, status indicator |
|||||||
|
Control System |
Balanced Temperature & Humidity Control System |
|||||||
|
Refrigeration system |
Water Cooled |
|||||||
|
Semi-hermetic compressor, single stage or cascade refrigeration system, |
||||||||
|
CFC free refrigerant ( HFC-507 and HFC-23 ) |
||||||||
|
Controller |
Panel |
7-inch LCD Touch panel, Chinese or English display selectable |
||||||
|
Operation model |
Program or fix point running |
|||||||
|
Memory capacity |
120 programs,1200steps, all repeat 999 cycles,part repeat 99 cycles |
|||||||
|
Accuracy |
Temp.:0.1% of F.S ± 1 digit Humidity:0.1% of F.S ± 1 digit |
|||||||
|
Input |
Temp.: pt-100, Humidity: pt-100 or ～5V DCV |
|||||||
|
Comm.port |
RS-232 or RS-485 ( Softawre is option) |
|||||||
|
Temp. range |
Maximum: 80 ºC,120 ºC; |
|||||||
|
Humidity Range |
10%, 20%, 30% ~ 95% |
|||||||
|
Temp. constancy |
±0.5 ºC |
|||||||
|
Humidity constancy |
±2.5%R.H |
|||||||
|
Temp. uniformity |
±2.0 ºC |
|||||||
|
Humidity uniformity |
±5.0%R.H |
|||||||
|
Ambient Temp. |
+5 ºC～+35 ºC |
|||||||
|
Wiring method |
AC 380 ± 10% 50Hz ,3 phase 4 wires + Ground Wires |
|||||||
|
Heat up time |
+20 ºC～+80 ºC, Within 60 min |
|||||||
|
Pull down time |
+20 ºC ~ -55 º, -40 ºC, -20 ºC, -10 ºC, Within 120 or 90 or 60 min |
|||||||
|
Interior material |
Stainless Steel Plate(SUS 304) |
|||||||
|
Exterior material |
Baked Painting Steel Or Stainless steel ( SUS304) |
|||||||
|
Insulation material |
Rigid polyurethane foam |
|||||||
|
Door size (mm) |
Single wing: W800 x H1800; Double wing: W1600 x H1800; |
|||||||
|
Note:1. We reserve the right to change specifications without prior notice 2.Customized sizes and configurations available |
||||||||
a. The chamber is assembled with self-made storeroom boards. The dimension and shape of it can be changed freely. It is assembled on site and can be transported, carries and relocated conveniently. The special silicon rubber imported from Japan is utilized as the base material for sealing and contracting for the assemble seams. The self-made storeroom boards employ the design and processing technology of frame structure, setting steel plates into the frame as inner part and outer covering and foaming into a whole body that boasts the distinctive features of high tightness, perfect sealing, wide range of temperature and humidity resisting, good warmness reserving and long life etc. of the industry.
b. Non-frosting operation and automatic defrosting loop, continuous operation in low humidity and temperature.
d. The precooling and preheating temperature are set automatically based on reset time. The operating state of the chamber can be adjusted to its best, which can save up to 50% of energy compared with the old model.
e. It is characterized by low error, high wind speed and uniform exposure of samples.
f. With the low noise design, the level of noise is controlled under 72db.
5. Walk-in Room Show
KOMEG is pioneer supplier for Environmental Testing Chamber in China with over 28 years’ experience. Our products include Climatic Test Chambers, Thermal Shock Test Chambers, walk-in Chambers, Drive-in Chamber, Burn-in rooms, Aging Test Chambers, Vibration Chamber, Temperature Humidity and Vibration three integrated Test Chamber, Drying Ovens, Salt Spray Testers and Medical Laboratory Equipment etc.
Temperature Humidity Test Chamber Series:
36L, 64L, 150L, 225L, 408L, 800L, 1000L, 1500L,2360L, 3000L and etc.
Walk in Chamber / Walk in Climatic Test Chamber / Walk in Temperature and Humidity Test Chamber / Aging Chamber series:
10CBM, 13CBM, 24CBM, 27CBM, 45CBM, 256CBM, 300CBM, 485CBM, 520CBM and etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.