Explosion Proof High Low Temperature Test Chamber 1.0 ℃ Temp Fluctuation For Battery
Explosion Proof High Low Temperature Test Chamber 1.0 ℃ Temp Fluctuation For Battery
More information , pls kindly contact :anna@komegtech.com Whatsapp :+86-18098282716
Application
High And Low Temperature chamber could used to test the application and the adaptability of the electronic products, assembles and materials under the low temperature, constant temperature and temperature cyclic change conditions.
Features
● GB-2423.1-2008(IEC68-2-1)Test A: Low Temperature Test
● GB-2423.2-2008(IEC68-2-2)Test B: High Temperature Test
● GJB360.8-2009(MIL-STD.202F) High Temperature Life Test
● GJBl50.3-2009(MIL-STD-810D) High Temperature Test
● GJBl50. 4-2009(MIL-STD-810D) Low Temperature Test
Main Technical Specifications
|
Temp. range |
-40℃ ～ +150℃
|
|
Temp. deviation |
≤±2.0℃
|
|
Temp. fluctuation |
±0.5℃
|
|
Temp. uniformity |
≦2.0℃
|
|
Heating and cooling rate |
Heating up rate: from -40℃ to +100℃ 45min (With load ,enviromental temp +25℃)
Cooling down: from +20℃ down to -40℃ approx 60min (with load,enviromental temp +25℃) |
| Chamber size |
inner W 800 × H 1200 × D 700 mm
Exterior Size W 1500 × H 1900 × D 1550 mm |
| Insluation box |
※ wall material: high-quality carbon steel
※ inner wall material: SUS304 # matte stainless steel plate
※ Insulation materials: rigid polyurethane foam insulation layer + glass fiber |
| Door |
Single door,Left open , heating wire is installed at the door frames to prevent
condensation at low temperatures
Two explosion-protected chains are added on both sides of the door, and the chain is longer
When the box is opened, the door can spring , allowing the internal air pressure to
escape quickly, but it must not be hurt people
|
|
Obverstion Window |
installed on the door,size: W210XH270MM multi-hollow electric insulation coated
glass prevent condensation effectively ,A stainless steel protective screen on the inside
of the glass prevents the glass from scattering during explosion |
|
Lighting Device |
1 PC 11W/AS220V installed in the inspection window
|
Others specification
|
Load |
A total of 8 batteries and fixtures are placed. The total heat is 200W and the
total weight is 130KG |
|
Sample holder |
4layer s/s sample holder , each layer put 2pcs ,Sample holder for insulation
,each layer can bear 30kg
|
|
cable port |
φ100mm*8pcs with rubber stopper and stainless steel cover
|
|
Mobile Casters |
Mobile Casters with foot cups
|
|
Electric control box |
Total power circuit breaker, over-temperature protection.
|
| Explosive pressure release device |
When the pressure in the equipment or pipeline exceeds the safety valve pressure relief automatically open
|
| Ventilator | When the pressure in the equipment or pipeline exceeds the ventilator automatically open |
Photos show
1) More than 26 years manufacturer experience and 8 years export experience.
2) Acceptable customization for all kinds of special specification products.
3) We value very inquiry sent to us, ensure quick and competitive offer.
4) We put your order into our tight production schedule, ensure your punctual delivery time
.
5) We are a sales team, with more than 4 years experience, more professional and reliable.
6) Welcome to view our factory at any moment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.