996 L Water Cooled Thermal Shock Test Chamber , Thermal Shock Test Machine

Price Negotiable

Price: Negotiation

MOQ: 1SET

Delivery Time: 30 days after confirm the order

Brand: KOMEG

Product Description

High temp +60ºC～+200ºC 996L water cooled 3-Zone thermal shock chamber

Product Description

three chamber in total: test space, high temp. chamber and low temp. chamber;

Advantage: slight limitation for test sample’s weight, the test sample keep still, this can reduce the impact

to samples by moving it, can be used for on-load testing.

Compared with 2-zone type, relatively low failure rate, low cost.

Disadvantage: long conversion time.

Features of Different Cooling Mode for thermal shock chambers

Since the cold chamber need huge cooling capacity for shocking, the chamber’s cooling mode is often

designed as air-cooled or water-cooled.

Air-cooled type need installation environment:

The room must be equipped with exhauster and air conditioner to make sure heat dissipation timely.

It’s applied to small power products and cool areas.

Water-cooled type need installation conditions:

The customer must prepare water pipe and water tower (located outside) accordingly.

The water must be pure, or it will block the pipes and result in some maintenance trouble with time going.

It’s often applied to large system with the features of better heat dissipation, longer service time, low

noise but slightly higher price if count the fee of water tower and water pipes.

Product Specifications

Interior size(WHD)mm	160016001500
Exterior size(WHD)mm	370044005000
Pre-cooling time	+20ºC～-55ºC, Within 60 min
Test. chamber	-40ºC～+150ºC
High Temp. chamber	+60ºC～+200ºC
Pre-heating time	+60ºC～+200ºC, Within 20 min
Recovery time	High-Temp Exposure 30 min
	Low-Temp Exposure 30 min
	Recovery time within 5 min
Safety device	NFB(No fuse breaker), over pressure, over heat and over current protection for compressor, over temperature protection, over load protection for blower, dry heat protection
Standard accessory	Cable port(portΦ50mm)1, shelves2
Interior material	Stainless steel plate(SUS 304)
Exterior material	Baked painting steel or stainless steel(SUS304)
Insulation material	Rigid polyurethane Foam + glass fiber wool
Refrigeration system	Water Cooled
Refrigeration system	Semi-hermetic compressor, cascade refrigeration system, CFC free refrigerant(HFC-507 and HFC-23)
Controller	Panel:7-inch LCD Touch panel, Chinese or English display selectable
	Operation model: Program or fix point running
	Memory capacity:120programs,1200steps, all repeat 999cycles,part repeat 99 cycles.
	Accuracy:Temp.:0.1% of F.S±1 digit Humidity:0.1% of F.S±1 digit
	Input:Temp.:pt-100 Humidity:pt-100 or ～5V DCV
Ambient Temp.	+5ºC～+35ºC
Power	AC 380±10％ 50Hz ,3 phase 4 wires +Ground Wires
Note:
1. We reserve the right to change specifications without prior notice
2. Customized sizes and configurations available