Laboratory 150L Thermal Shock Test Chamber Temperature Range -65℃ ～ +150℃
Laboratory 150L Thermal Shock Test Chamber Temperature Range -65℃ ～ +150℃
Applications
Use low temperature and high temperature cold storage heat storage tank to open DAMPER according to
the action to achieve rapid impact effect; balance temperature control system (BTC), control SSPR in
P.I.D. mode, so that the heating amount of the system is equal to the heat loss, so it can be used stably
for a long time.
Specifications
| Ⅱ. Main Technical Parameters:(Water Cooled,Water temperature+25℃,no load ) | ||
| 1. Laboratory temperature range | -65℃ ～ +150℃ | |
| 2. High Temp.chamber | +60 ～ +200℃ | |
| 3. High temp.chamber heat up time | From +60℃ ～ +200℃ 20min | |
| 4. Low Temp.chamber | -80℃ ～ -10℃ | |
| 5. Low Temp.chamber pull down time | From +20℃ ～ -70℃ 60min | |
| 6. Shock recovery time |
-65℃ ～ +150℃ about 5min (with load IC 5kg) (Sensor placed in the unit outlet) |
|
| 7. High and low temperature shock constant temperature |
Above 30min | |
|
8. Temp.uniformit |
±2.0℃ | |
| 9. Temp.fluctuation | ±0.5℃ | |
| Ⅲ. Structure | ||
| 1. Workspace volume | W 600 × H 500 × D 500 mm | |
|
2.Exterior size |
About W 1620 × H 2040 × D 2100 mm (Not contain a prominent part) | |
| 3. Chamber Structure | Independent product testing area, high temperature heat storage area, low temperature storage area |
|
| 4. Interior material | (SUS 304#) | |
| 5.Exterior material |
|
|
| 6. Insulation material |
High Temp.chamber:24k Glass fibre wool Low Temp.chamber: PU Foam+Glass fibre wool |
|
| 7. Heater |
Bare wire heater |
|
| 8. Air circulation system | a.TECO Motor b.Stainless steel ext c.(SIROCCO FAN) |
|
| 9.Door | Single door, a .Flat embedded handl B. Rear button:SUS 304 C. Silicone foam strip |
|
Standards Met and Implemented:
GB/T2423.1.2
GB10592-89
GJB150
Prouduct Display
Packing and Shipment:
We deal with your complains within 24 hours.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.