Hydraulic Drive Battery Squeeze Test Equipment Squeeze Force Range 1 KN ~ 20kN
Test Purpose
It suit for simulating the battery being squeezed when using, transporting, storing or disposing of household waste. The battery is qualified to not explode or fire.
Test Standard
IEC62133; UL 1642:2012; UL 2054:2012; IEC 62281:2004
Standard Features
| Item | Specification |
| Drive mode | hydraulic drive |
| Extrusion direction |
a. For a cylindrical battery, the longitudinal axis of the extruded battery should be parallel to the two plates of the extrusion device; b. For square and soft pack batteries, squeeze the wide side of battery only; c. For the coin type or button type battery, the extrusion test is performed by using the upper and lower planes of the battery in parallel with the flat plate; |
| Squeeze force range | 1 kN ~ 20kN |
| Pressure display accuracy | 0.1N |
| Sensor resolution | 1/1000 |
| Unit conversion | kg, N, lb |
| Data sampling frequency | 80 times/sec |
| Effective test space(W*D*H) | 200*200*200mm |
| Extrusion stroke | 250mm |
| Delay function | 0-9999 (H/M/S can set and adjust test time arbitrarily) |
| Clamping method | manual clamping |
| Machine dimension(W*D*H) | 800*800*1800mm |
| Power supply | 3-phase, 380V, 50Hz |
|
Internal chamber material |
1.2mm thick stainless steel plate with Teflon; strong corrosion resistance and flame retardant |
| External chamber material | 1.5 mm thick A3 cold plate paint treatment |
| Observation window | Two-layer vacuum tempered glass observation window with size 250*250mm |
| Exhaust port | Diameter: 100mm; it start work once when machine operate |
| Door safety device | Open and power off threshold switch |
| Test hole | A test hole with a diameter of 50 mm on the left side of the machine |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.