pressure controls KP series KP1 KP5 KP15 060-126566

Specifications:

1. Pressure controls are pressure-activated switches,with a basic function to make or break an electrical circuit which in tur controls a solenoid coil, a contactor or some other functioning part of the system.
2. The set point at which a control closes a contact and makes a circuit is called the cut-in point.
3. The point at which the control opens the switch and breaks the circuit is called the cut-out point.
4. The difference between the cut-in and cut-out point is known as the differential.

* Used in a neutral or corrosive gas and liquid medium 

* Adjustment range is 0.02~42Mpa 

* In high, low and dual pressure 

Technical data 

Can be used for vacuum 

The control system is a miniature design 

Working viscosity: Below 1× 10-3m2/s 

Switch element: Sensitive switch 

Environment temperature: - 25-55° C 

Medium temperature: - 25-80° C