Class 2500 High Pressure Alloy Steel Butt Weld Fittings Reducing Tee WP91
Class 2500 high pressure butt weld fittings are built for the most demanding steam and process lines, where a failure would be catastrophic. This reducing tee is made from WP91 chrome molybdenum alloy steel, a material developed for high temperature, high pressure service in power and hydrogen applications.
The Class 2500 wall thickness gives these high pressure butt weld fittings a very high working pressure, and the WP91 alloy resists creep and oxidation at elevated temperature. The reducing branch allows a smaller line to be tapped from a main header without adding a separate fitting.
Each high pressure reducing tee is forged, heat treated and machined to ASME B16.9 and ASTM A234, with wall thickness controlled to your schedule from SCH80 up to XXS. The material is fully traceable and can be supplied with ultrasonic and radiographic testing.
Typical applications include supercritical boiler headers, main steam lines, hydrogen processing and high pressure chemical service. For projects needing Class 2500 butt weld fittings with certified chrome moly material, our reducing tees deliver reliable, code-compliant performance.
| Material Grade | WP91 / Chrome Moly Alloy Steel |
|---|---|
| Product Type | Reducing Tee |
| Size Range | 1/2 inch - 24 inch |
| Wall Thickness | SCH80 - XXS |
| Standards | ASME B16.9 / ASTM A234 |
| Pressure Rating | Class 2500 / 6000 PSI |
| Surface Finish | Black Painting or Bare |
| End Connection | Butt Weld (BW) |
- Class 2500 rating for the highest pressure steam and process duty
- WP91 chrome moly resists creep at high temperature
- Forged construction for dense, defect-free material
- Reducing branch saves space and avoids a separate fitting
- Radiographic and ultrasonic testing available on request
- Machined to ASME B16.9 for accurate fit-up
- Supercritical boiler headers
- Main steam and reheat lines
- Hydrogen and hydrocracker piping
- High pressure chemical reactors
- Combined cycle power plants
Every High Pressure Butt Weld Fitting is packed in seaworthy wooden cases or pallets with protective end caps. We offer customized marking and labeling, and can consolidate mixed sizes in a single shipment to reduce your freight cost and handling time.
As a High Pressure Butt Weld Fittings manufacturer, we support custom sizes, wall thicknesses and materials, and arrange third party inspection such as SGS, BV or TUV on request. Our engineers review every enquiry and recommend the material, wall thickness and standard that best match your pressure, temperature and corrosion requirements.
Each High Pressure Butt Weld Fittings order is dimensionally inspected against the applicable standard before dispatch, and our quality team retains a sample record that can be re-tested on request. We also welcome factory audits and pre-shipment inspections from overseas buyers, and can supply reference projects and test reports to support your tender documents.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.