Astm A403 Wp317/ 317 But Weld Fittings Short / Long Pipe Stub End 1” To 60” Sch10s To Sch160s
Astm A403 Wp317/ 317 But Weld Fittings Short / Long Pipe Stub End , Lap Joint Stub End 1” To 60” Sch10s To Sch160s
317L
317L is a molybdenum containing austenitic stainless steel, with improved corrosion resistance over 304/304L and 316/316L stainless steel. The increased levels of chromium, nickel and molybdenum over 316L stainless steel improve chloride pitting resistance and general corrosion. Through the controlled addition of nitrogen it is common for 317L to meet the mechanical properties of 317 straight grade, while maintaining a low carbon content.
Chemistry
| Ni | Cr | Mo | Mn | Si | C | N | S | P | Fe | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIN | 11.0 | 18.0 | 3.0 | - | - | - | - | - | - | - |
| MAX | 15.0 | 20.0 | 4.0 | 2.0 | 0.75 | 0.03 | 0.1 | 0.03 | 0.045 | Balance |
Specifications
ASME SA 240
ASTM A 240
UNS S31703
W. NR./EN 1.4438
Inventory
317L Coil, 317L Plate, 317L Welding Products
Common Trade Names
317 Stainless, 317L Stainless
Features
- Improved general and localized corrosion to 316/316L stainless
- Good formability
- Good weldability
Applications
- Flue gas desulfurization systems
- Chemical process vessels
- Petrochemical
- Pulp and paper
- Condensers in power generation
Physical Properties
Density: 0.285 lb/inch3
Melting Point: 2540 - 2630°F
Poisson's Ratio: 0.3
Electrical Resistivity: 475 Ohm-circ mil/ft
Physical Properties of 317/317L Alloys in the Annealed Condition at -20°F to +100°F
| Tensile Strength | Yield | |||||||||||||
| Alloy | UNS Desig | Spec. | psi | MPa | ksi | psi | MPa | ksi | Elongation in 2 inches (min.) % | Grain Size Req. | Max. Har | Modulus of Elasticity (x106 psi) | Mean Coefficient of Thermal Expansion (IN./IN./°F x 10-6) | Thermal Conductivity (BTU-in/ |
| 317 | S31700 | A249, A312 | 75,000 | 515 | 75 | 30,000 | 205 | 30 | 35 | — | 90 Rb | 28.0 | 9.2 | 116 |
| 317L | S31703 | A249, A312 | 70,000 | 485 | 70 | 25,000 | 170 | 25 | 35 | — | 90 Rb | 28.0 | 9.2 | 116 |
Composition of 317/317L tubing and pipe
| Grade | 317 | 317L |
| UNS Designation | S31700 | S31703 |
| Carbon (C) Max. | 0.08 | 0.035* |
| Manganese (Mn) Max. | 2.00 | 2.00 |
| Phosphorous (P) Max. | 0.040 | 0.04 |
| Sulphur (S) Max. | 0.03 | 0.03 |
| Silicon (Si) Max. | 1.00 | 1.00 |
| Chromium (Cr) | 18.0–20.0 | 18.0–20.0 |
| Nickel (Ni) | 11.0–14.0 | 11.0–15.0 |
| Molybdenum (Mo) | 3.0–4.0 | 3.0–4.0 |
| Nitrogen (N) | — | — |
| Iron (Fe) | Bal. | Bal. |
| Other Elements | — | — |
* Maximum carbon content of 0.04% acceptable for drawn tubes
317/317L Product Range
| Alloy | UNS Designation | Werkstoff NR. | Specifications* |
| 317 | S31700 | — | A269, A/SA249, A/SA312 |
| 317L | S31703 | 1.4438 | A269, A/SA249, A/SA312 |
   | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product name : lap joint stub end | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Item : buttweld-Lap Joint Stub End | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Details : | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.