Application:

Porcelain, furniture, metal and wood railings, fences, bicycles, hobbies, crafts, plastic and metal garden accessories, cabinets, doors, patio items, wicker, tools, masonry, bulkheads, and thousands of other items

Specifications:

Directions:

• Clean surface to remove all dirt, grease, wax, polish, etc..
• Lightly sand surfaces to ensure adhesion or remove loose paint and rust with a wire brush.
• Prior to use shake can for approximately 1 minute after mixing ball rattles and continue to shake can occasionally between spraying.
• Hold can approximately 15~25cm away from object being sprayed. Move can rapidly back and forth while spraying for even coverage.
• Use at room temperature. Do not apply when temperature is below 15℃ or above 40℃. Avoid use during windy conditions.
• Best results are obtained when two thin coats are applied.
• If valve spatters or clogs, press button up and down rapidly or turn either direction to clear blockage. The valve can be removed for cleaning and should be replaced with a gentle twisting motion.
• When spray coats are completed, invert can and spray one or two seconds to remove excess paint from spray head.