750ml B3 PU Foam Spray / Spray Insulation Foam Can One-component
 
Description:
 

Aristo One-Component Construction PU Foam cures when moisture in the air reacts with the chemistry of the foam, it can be used to economically insulate and fill of large seams, joints and cracks against heat loss, cold, draught, noise and moisture, adhere to all building materials except polyurethane foil, silicone and .

Application:

1. Door and window insulation: seal, fill, fix and adhere the gap between doors, windows and walls.

2. Advertisement model: make model and sand plate, repair show board.

3. Sound insulation and absorption: insulate and absorb sound as a sealant in speech room and broadcast studio.

4. Gardening: make ikebana and gardening simple and beautiful.

5. Daily Maintenance: repair the hole, gap, brick and floor.

6. Resisting water and fixing leak: mend the hole of water pipe and cloaca.

7. Packing and transportation: pack valuable and fragile goods easily and quickly, resist shock and press.

Directions:.

1. Product is flammable during dispensing. Surfaces should be free of oil, dust and grease, wear eye protection and gloves.

2. To assemble straw onto trigger, screw trigger assembly onto the valve of the can. On initial use shake can vigorously for one minutes and activate trigger in upside down position until foaming begins

3. Fill cavity 1/2 full, foam expands to fill area. Do not apply into spaces with inadequate moisture and humidity.

4. Clean wet foam immediately from valve stem, unscrewed trigger, skin and clothing with acetone. Store can in upright position. Bonds quickly to skin, apply petroleum jelly, leave on 1 hour and wash. Repeat process until foam is removed. Do not attempt to remove dried foam with solvents.

5. Dried foam can be painted, sanded, plastered, grouted or caulked. Paint applications exposed to sunlight.

Features:
 

1. Fills Cracks & Holes

2. Stop Drafts

3. Seals & Insulates

4. Black Insect Pathways