Aristo Heavy Duty Engine Degreaser / Engine Surface Cleaner Spray 500ml

Specifications:

Description:

Aristo Engine Degreaser powerfully removes grime. A clean engine runs cool and looks new. Use on most metal surfaces including automobiles, boats, power mowers, machinery, garden, farm and construction equipment.

Features:

• Spray on & Rinse off
• Easy to Use
• Removes Grease & Grime
• Leaves No Residue

Application:

• Engine must be off and cool.
• Remove air cleaner cover and filter. Cover air intake system (or carburetor), distributor, all exposed wiring and electronic components. Limit rinse water contact on all under hood wiring and electronic sensors to prevent performance problems.
• Spray Engine Degreaser on dry engine.
• Allow to penetrate and clean for 10 to 15 minutes. Brush heavy deposit areas it required.
• Before rinsing, place a rinse collection receptacle underneath the engine.
• Rinse from the top down using a fine stream of water. Use a minimum amount of water. Do not dispose of rinse water on the ground in sewers floor drains or other waterways.
• Remove all covers from carburetors, distributors, air intake system and electronic components. Replace all remove parts, immediately start engine and let idle for 10-15 minutes to dry.

Direction:

• Do not puncture, incinerate or store can above 120℉. Exposure to high temperature may cause can to burst.
• Do not place in direct sunlight or near heat sources. Product is flammable and should be kept from all flames and other ignition sources.
• Progressively higher exposure to vapor may cause eye and skin irritation, headaches, nausea, dizziness.
• Use with adequate ventilation, open doors and windows or use other means to ensure a fresh air supply during use. Avoid continuous breathing of vapor and spray mist, avoid contact with skin and eyes.
• Keep way from children.