Manual 6 Ton Aluminum Plate Lifting Clamp , Jaw Opening 10 - 100mm
Product Description
Seagull lifting clamp 6-Ton Plate Clamp Capacity, Jaw opening 10-100mm
Vertical plate clamp features pivoting bale for easier and more versatile operation. Not designed for use on stainless steel or aluminum plates. For use with materials with a
surface hardness to 30 RC (300 HB).
Advantages
• Pivoting bale for easier and more versatile operation
• Automatic serrated hardened steel cams and pads
• Drop-forged steel case for maximum strength
• Warning: Do not exceed the working load limit. Serious bodily injury or property damage may result
• Do not use plate clamps to lift loads less than 20% of rated capacity. Lift only one plate at a time.
Plate must be clean and free of oil
* Capacity from 2T to 6T.
* Forged head and forged gear set ensure the durability and safety.
* Gripper is HRC 52-57 for longlife use.
* More thickness of the steel plates to ensure the good safety.
* One year guarantee.
Technical Parameters
| Model | DHQA-1 | DHQA-2 | DHQA-3 | DHQA-5 | DHQA-6 | DHQA-10 |
| Rated capacity(T) | 1 | 2 | 3 | 5 | 6 | 10 |
| Test load | 2 | 4 | 6 | 10 | 12 | 20 |
| Jaw opening(mm) | 0-30 | 0-50 | 0-60 | 10-80 | 10-100 | 20-120 |
| Net Weight(kg) | 4 | 5.5 | 8 | 11.5 | 14.5 | 30 |
Application
Applicable to construction, industrial, commercial, vertical lifting work
Product instructions
To a single test for the rated load, lifting operations in a single or two groups of use, lifting the factory may not be hit by hanging objects, the test load of 2 times the maximum working load, is strictly prohibited overload
Packing
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.