PVC AL or AL AL or AL PVC AL Tropical Blister Packing Machine DPP-250F

PVC AL or AL AL or AL PVC AL Tropical Blister Packing Machine DPP-250F

Specifications

Tropical Blister Packing Machine is a kind of Environmental Blister Packing Machine designed and produced by our company. The machine can be disassembled by three parts for convenient transportation purpose. It comes with integrating mechanism, electricity and pneumatic system under PLC control and Touch screen operation includes automatic preheating, compressed air blow forming, feeding, detection system, PRC System, first sealing station, batch number embossing, tropical foil forming, second sealing station, perforation station, servo pulling system, cutting station, rejection system and wasted material rewinding station, etc.  The machine suitable for blister packing with Alu-Plastic, Alu-Alu and Alu-Plastic-Alu.
Model	ALU-Plastic-ALU	ALU ALU	ALU-PVC
Machine Body	Stainless Steel 304 (medicinal contact can be selected SS3016)
Blanking frequency(times/min) (Standard size 57*80)	12-30	15-30	20-45
Adjustable pulling length	30-120mm
Blister Plate Size	Design According To Customers’ Requirements
Max Forming area and depth(mm)	250*120*15	250*120*13	250*120*15
Power supply(Three phase)	380V/220V 50HZ 11.5KW	380V/220V 50HZ 4.5KW	380V/220V 50HZ 8KW
Packaging Material (mm) (I.D.Φ75mm)	Tropical Foil 260*(0.1-0.12)*(Φ400)   PVC 260*(0.15-0.4)*(Φ400)	Alu Alu Foil 260*(0.14-0.18)*(Φ400)	PVC 260*(0.15-0.4)*(Φ400)
	Blister Foil: 260*(0.02-0.15)*(Φ250)
Air compressor	0.6-0.8Mpa  ≥0.5m3/min (self-prepared)
Mould cooling	(Recycle water or circulating water consumption) 60-100 L/h
Overall Dimension(L*W*H)	4450*800*1600(including foundation)
Dimension of Each Part	1400*800*1600(front)
	1650*800*1450(middle)
	1400*800*1450(back)
Weight	About 1700kg

Competitive Advantage

1. All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous data have been programmed in advance so that there is no need to adjust air supply and pulling time manually. The machine in other factory use Cam control, which means the process is mechanical. The biggest disadvantage of it is that the friction is inevitably which will lead to wear and tear. As time passes, the synchronization is not accurate. But our machines use encoder control, so that there is no need to worry about the synchronization. If the encoder is broken, you can also buy it in the local, it’s convenient.
2. Our machine use Stepper motor to control the pulling length. When change the model, there is no need to adjust the machine so that it’s convenient and easy operating. What I want to mention is that the machines in other factory use gas clip to control the pulling length. It has two shortcomings. First, when you change the models, you need to adjust the pulling length manually which means adjusting screw in the pulling position. If the Operating workers is unskilled, it will waste the material and time. 
3. Our machines have PRC (print register control) system, is the cursor version of function, because the machine is a stepper motor, so is true of PRC system forever won't generation shift. Other manufacturers may be gas clip can only be manually adjusted, a long time after the shift will occur.