HPGR Tungsten Carbide Studs For Rolling Machine , Hard Rock Crushing Wear Resistant Surface
HPGR Tungsten Carbide Studs For Rolling Machine , Hard Rock Crushing Wear Resistant Surface
Specification
1. Hemispherical top, protect the HPGR carbide studs from being destroyed by stress concentration.
2. Round edges, protect the HPGR carbide studs being damaged during production, transportation, installment and using.
3. HIP sintering ensure good compactness and high toughness for the products.
4. Special technology to eliminate the surface stress after surface grinding, and increase the surface hardness at the same time.
5. Grease used on surface of the products to avoid oxidization.
Grades we recommend are as below:
| Grades | D(g/cm3) | HRA |
≥ N/mm2 |
| RX-11 | 14.4 | 87 | 2700 |
| RX-15 | 14 | 87 | 3000 |
| RX650 | 13.8 | 88.2 | 3100 |
| RX20 | 13.5 | 85.5 | 3200 |
Unit: mm
| Specification | Height | Diameter | Accuracy | Finish |
| Z1160200 | 20±0.3 | 16±0.01 | H7 | 0.2 |
| Z1200250 | 25±0.3 | 20±0.01 | H7 | 0.2 |
| Z1220300 | 30±0.3 | 22±0.01 | H7 | 0.2 |
| Z1220350 | 35±0.3 | 22±0.01 | H7 | 0.2 |
| Z1220400 | 40±0.3 | 22±0.01 | H7 | 0.2 |
Remarks:
Dimension refers to drawing.
Customize for client’s requirements is available.
Fully angular differs from different models.
all sizes as below:
| Specification | H | D | SR | Ra(mm) |
| Z2050100 | 10±0.3 | 5±0.01 | 2.5 | 0.2 |
| Z2050120 | 12±0.3 | 5±0.01 | 2.6 | 0.2 |
| Z2080200 | 20±0.3 | 8±0.01 | 4.0 | 0.2 |
| Z2100200 | 20±0.3 | 10±0.01 | 5.0 | 0.2 |
| Z2100220 | 22±0.3 | 10±0.01 | 5.0 | 0.2 |
| Z2100250 | 25±0.3 | 10±0.01 | 5.0 | 0.2 |
| Z2160180 | 18±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160205 | 20.5±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160230 | 23±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160350 | 35±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160400 | 40±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160450 | 45±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2160500 | 50±0.3 | 16±0.01 | 8.0 | 0.2 |
| Z2200250 | 25±0.3 | 20±0.01 | 10.0 | 0.2 |
| Z2200300 | 30±0.3 | 20±0.01 | 10.0 | 0.2 |
| Z2200350 | 35±0.3 | 20±0.01 | 10.0 | 0.2 |
| Z2200400 | 40±0.3 | 20±0.01 | 10.0 | 0.2 |
Grades above are exclusive grade we developed for rolling machine. Good wear resistance and high strength are suitable for metal smashing with high working efficiency. Lifetime of HPGR carbide studs is over 8000-10000 hrs.
Dimensions can be done by client's drawing.
Application
If rolling machine uses HPGR carbide studs, it gets high density,high strength and good impacting property. Lifetime of Cemented carbide stud is over 10 times more than surfacing material.
Contact us
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.