0.4-0.8mm Thickness PPGI 75mm Diameter Drain Pipe Round Rain Downspout Roll Forming Machine
0.4-0.8mm Thickness PPGI 75mm Diameter Drain Pipe Round Rain Downspout Roll Forming Machine
Water Downspout machine technical parameter
|
Product Name |
color steel round downspout roll forming machine |
|
Suitable material |
Cold rolled coil,hot rolled coil, galvanized coil |
|
Q235Mpa.Q350Mpa,Q550Mpa |
|
|
0.4-0.8mm |
|
|
Coil |
Feeding Width: (customized) |
|
Forming speed |
13-15m/min |
|
Roller stations |
15-24stations |
|
Material of roller |
45# steel finish maching , plated hard |
|
Hardness of roller |
HRC: 58-62 |
|
Material of main shaft |
45# steel finish maching , then slack |
|
Driven motor power |
11Kw |
|
Hydraulic station power |
4 Kw |
|
Hydraulic station pressure |
12.0 Mpa |
|
Electrical control system |
Panasonic PLC |
|
Material of cutter |
Cr12 MOV |
|
Hardness of cutter |
HRC: 58-62 |
|
Driving mode |
Single chain 1 inch |
|
Power supply |
380V, 60Hz, 3 Phase or as per request |
|
Cutting accuracy |
±1.5mm |
|
Dimension(L*W*H) |
9500mm* 800mm*1200mm |
Main Components
| Commodity & Description | Quantity |
| 5Tons manual uncoiler | 1 set |
| feed and guiding device | 1 set |
| Main roll forming machine | 1 set |
| Straighten device | 1 set |
| Hydraulic cutting device | 1 set |
| Output table | 1 set |
| Hydraulic system | 1 set |
| Controlling system | 1 set |
| Elbow machine | 1 set |
| Seaming machine | 1 set |
Machine Components
The Whole downpipe roll forming line comprised of 3T manual uncoiler, main drive, infeed guiding, roll forming machine, straighten device, cutting equipment, hydraulic system, electrical controlling system, out put table. Elbow and seaming machine
Uncoiling – Infeed Guiding– Roll forming – straighten – Hydraulic cutting – Run-out table-elbow-seaming
Profiles of Square Pipe
Photo of machine
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.