60mm 90mm 150mm Strip Width Adjust Drywall Ceiling Systems Metal Stud And Track Roll Forming Machine

1. Technical Parameter

The keel machine uses strip steel as raw material, through continuous cold rolling, to produce complex cross-section profiles, using PLC control, simple operation, integrated machine equipment, saving space

 
2. Machine Components

1. Main roll forming machine

A. Machine main motor power: 5.5kw 

b. Number of forming wheel rows: 12 rows

c. Forming wheel material: Cr12Mov heat treated surface with hard chrome plating

D. Spindle diameter: 60mm

E. Main shaft material: 45# steel, heat treated (quenched and tempered)

F. The thickness of the vertical plate of the discharge rack: 40mm

g. chain drive system

H. Forming machine base: 30mm steel plate welding

i. Punching and shearing die material: Cr12Mov heat treatment

2. Electrical control

A. plc[Delta]

b. Inverter [Delta]

c. Length Encoder [OMRON]

D. Remote control host

3. Hydraulic system

A. Hydraulic pump station: 4w

b. The electromagnetic valve

c. hydraulic cylinder

3. Application

Typically used in corridors, bathrooms, kitchens and fire tunnels a spanning system can overcome a lack of supporting structure above by providing a ceiling joist to which plasterboard or other lining materials can then be fixed.

4. Working flow

Decoiler--servo feeding- press punching for the holes and notch--roll forming-- hydraulic cutting- out put tables

5. Machine picture
 

Light steel frame machine is to make the wall strcuture or ceiling system, it is used to plaster board, gypsum board and other decorative finishes lightweight board.

Products made by this machine are suitable to use in hotels, theaters, shopping malls, factories, office buildings, old building renovation, interior decoration settings, roof and other places.

Material for this machine is galvanized steel plate, snowflake plate and cold steel plate,we can according to customer design, manufacture different specifications of cold-formed.