The products made by us is high resisitivity against heat ,humidity ,moisture,

water etc. Owning to use the rare earth special craft during the production

process, to ensure its high precise, good quality and competitive advantage.

Meanwhile, we can accept the product type damage test to ensure the high

safe factor of our products. Because of good quality and competitive price

caused by innovation and management reform, experienced service in

fabrication ,design, installment, consultancy, we have built long-term relationship

with many countries, such as America ,Morocco,Sir Lanka ,Russia, Jordan,

Guyana,Nigeria, Australia, Spain, Indonesia, Singapore, the Philippines, Kenya,etc.

Technical Property of the 35FT Electrical Power Pole

1.mechanical Property

The metal supports are designed to withstand the nominal force F and the pressure of the wind

V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic

limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V)*1m. Tests

shows the load intervened when breaking is around 2 (two) times of design.

2.steel 

The material is in accordance with NF EN 10025 Standard and NF EN 10149 Stabdard,

it has the dollowing property

---Yield strength  =355 N/m

---Toughness remains the same under 20 degrees below zero   

---Glavanization is in accordance with NFA35503 Standard Class

3.Glavanization

---Stand: NFA91121

---Average thickness of the galvanization : not less than 86 μm

4. Manufacture Tolerance

---Componet Length:-25mm to 75mm

---Stranghtness: 2mm/m

---Twisting degree: 1° per 3 meters length

---Ovalisation: Maximum is 3%

---The average diameter : +/-0.5%

---Slip length: +/-150mm

5.Standaed Accessory

---Top plate

---Base plate

---Bottom strip

---Climbing rung

---Anchor bolt

---Bitumen marking

---Removable ladder

6. The information to inquiry or purchase

---Steel pole height and force 

---Cross arm type and length, the position to install in the steel pole

---The method to fix the cross arm (use Bolt to connect or use one or two template to weld in

    the steel pole to install the cross arm)

---Safety factor of the steel pole.

---wind speed

---Type of climbing rung

---Destination port