3mm Thickness 40ft 500KG Gr65 Electrical Power Pole , Electrical Transmission Poles
3mm thickness 40ft 500KG power transmission Gr65 electric pole
|
Material: |
Hot rolled steel, GR65, Q235,Q345,S235, or customized |
|
Pole’s height |
3m –15m |
|
length |
Within 16m once forming without slip joint |
|
Wall thickness |
2.5mm-20mm or optional |
|
Pole's Shape: |
Round, Polygonal, Octagonal, Conial |
|
Arm type: |
Single arm, Double arm, or as per cliens' request |
|
Application: |
road,avenue, street, expressway, park, square |
|
Temperature range |
-35 °C~+45 °C |
|
Max wind velocity |
Aganist wind pressure of 160Km/h |
|
Base plate mounted |
Base plate is square, octagonal or round in shape with slotted holes for anchor bolt and dimension as per customer’s requirement. |
|
Ground mounted |
The length buried underground as per customer’s requirement. |
Utility poles are commonly used to carry two types of electric power lines:distribution lines (or "feeders") and subtransmission lines.
Steel poles can provide advantages for high-voltage lines, where taller poles are required for enhanced clearances and longer span requirements.
Electric Power Tower includes angle steel tower, tapered tubular steel, transformer substation framework, power plant framework and so on.
Electric power tower is the steel structure frame of bracing electrical wires, keeping a sage distance of guild wires and buildings on the ground. According to appearance, the power tower can be divided to glass type tower, cat head type tower, Shang type tower, Gan type tower and doliform tower.
Steel tube tower mainly use between high voltage transmission lines, with lightning rod hanging place on top, bolt connecting tower body with cross arm which has wires hanging place. The intersecting surface of tower is oblong, and the intersection surface macroaxis of tower and cross arm is 0 to 90 degree angle. In practical application, raw material can be saved of shorten the circumference of intersection surface by bearing the max bending moment of oblong intersection surface macroaxis.
All of our material are purchased from famous mill factory to assure the quality
A mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory; otherwise we have our reason to refuse the material.
Before put into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and component.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.