E - bike GPS Tracker With 180mAh Battery Support Power Off Alert

Feature:

1. GPS Positioning

2. Playback Routes

3. ACC ignition detection

4. Overspeed alert

5. Burglar alert

6.Setting Function via SMS

7. Built-in GPS GSM Antenna

8. Power Off Alert

9. Remote Cut Off Engine Via Relay

10. Support GT06 Protocol

Parameters:

1. Dimension: 67*33.8*11.5mm

2. Weight: 31g

3. GPRS: Class12,TCP/IP

4. GPS Sensitivity: -159dBm

5. GSM Frequency: 850/900/1800/1900Mhz

6. Operation Voltage: 9-100VDC

7. Position Accuracy: 10m

8. GSM/GPS Antenna: Built-in Design

9: Data Transmit: TCP,SMS

10: Non-movement Detection: Movement Alert based on built-in 3D

11: Mileage Report: Track by time/distance interval power off

Applications :

Fleet management

Car service shops and car delears

Insurance company

Car rental company

Taxi company

Dropship company

Project vehicle

Motor and bike

LED:

Steps of installation:

1. Open the back cover,insert a SIM card to SIM Card Slot.

2. Switch power button up(Power on).

3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the 

    receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.

    It shows working normally.

4. Close the back cover.

5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.

    the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.

SMS Commands:

Picture:

Mobile Phone Interface

PC Interface

History Track