Waterproof Car GPS Tracker , Gps Magnetic Car Tracker With Ignition Detection Function
Real Time Online Tracking Car GPS Tracker With Shut Off Engine Via Relay
Main Functions:
| NO. | Function |
| 1 | Real time Tracking |
| 2 | Ignition Detection |
| 3 | Shut Off Engine |
| 4 | History Track |
Feature Description:
| NO. | Feature | Descrption |
| 1 | GPS Positioning | Via GPS positioning,User can track the vehicle location,speed and routes through phone or computer. |
| 2 | Playback Routes | Can check the vehicle’s routes and speed in recent 2 months. |
| 3 | Setting Function Via SMS | Setting function of device via SMS and check location via SMS. |
| 4 | Ignition Detection | Get vehicle status via ACC ignition detection |
| 5 | Vibration Alarm | After setting,Device will send message and call user if theft shock the car or drive the car away. |
| 6 | Overspeed Alarm | When speed is over than the set speed, device will send message to user. |
| 7 | Shut Off Engine | User can cut engine via platform or sending message to device. Vehicle will be shut down and theft can’t drive car away.( For safety considering, it will not cut engine while speed is above 20km/h) |
| 8 | Built-in Antenna | Built-in high tech of GPS/GSM antenna for easy installation. |
Application:
1. Fleet management
2. Motor and bike
3. Rental Car Company
4. Taxi Company
5. Insurance company
Parameters:
| Dimension | 67(L) x 33.8(W) x 11.5(H) mm |
| Weight | 31g |
| GPRS | Class12,TCP/IP |
| GPS Sensitivity | -159dBm |
| GSM Frequency | 850/900/1800/1900Mhz |
| Operation Voltage | 9-100VDC |
| Position Accuracy | 10m |
| GSM/GPS Antenna | Built-in Design |
| Data Transmit | TCP,SMS |
| Non-movement Detection | Movement Alert based on built-in 3D |
| Mileage Report | Track by time/distance interval power off |
LED:
| GPS LED | Blue |
| GSM LED | Green |
| Power LED | Red |
Steps of installation:
1. Open the back cover,insert a SIM card to SIM Card Slot.
2. Switch power button up(Power on).
3. Connect the power cable with the interface of device. Now theree LED lights will lighting. Make sure the
receiving side face up, without any metal object shelter. The LED lights will glashing after 1 to 5mins.
It shows working normally.
4. Close the back cover.
5. Please ask professional technical to connect wires and install to the vehicle. After correct installation.
the REd LED will falshing, 1 min. Later the Blue Led will falshing too. That shows installing completely.
SMS Commands:
| Add Administrator No.1 | #6666#AAD#1#Cell No# |
| Cut Engine | #6666#CF# |
| Restore Engine | #6666#OF# |
| Check Status | Status# |
| Restart device | #6666#reset# |
Picture:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.