700mm Capacitor Fuel Sensor GPS Tracker Device Support 2G GSM Network

CA-V7 is one multi function GPS Device with UBLOX GPS Chip and 2G GSM module.

It supports fuel sensor ,camera,control engine on or off and so on.

Main Features:

1. Real Time tracking

2. History Track

3. Fuel sensor function

4. Temperature sensor function

5. one to four cameras

6. DC12V or DC24V relay

7. Micro phone

8. Mileage Statistics

9. SOS Alarm

Specification:

1. Device size: 87*64*26mm

2. Weight: 495g

3. Standby work consumption is less than 30mA

4. GPS Accuracy is less 5 meters

5. GPS Sensitivity: -159dbm

6. Work voltage: DC 9V to 36V

7. GPS Chip: Sirf 3 chip

8. GSM Module: SIM900 or SIM900A module

9. Network: GSM GPRS GPS

10. Band: 850MHz 900MHz 1800MHz 1900MHz

SMS Command:

1. Control Oil:   Stopoil123456 is for stop oil ,   Supplyoil123456 is for supply oil.

  123456 is the password of device.

2. Control Circuit:  Stopelec123456 is for stop electricity.  Supplyoil123456 is for supply electricity.

  123456 is the password of device.

3. Change password:   Password123456 654321,   123456 is old password, 654321 is old password.

Installation Diagram:

GPS Tracker should be installed by technical professional of local service center, without permission, 

The user can not repair and move the tracker randomly. If users do, any unfortunity damage should

be compensated by himself.

Installation steps (caution: the following installation should under no power, otherwise will be dangerous.

1. Power supply line: The red wire connects 12V" +", black wire connects to GND.

2. Wire for cutting off oil of the tracker

    Yellow wire connects the relay pin 86, 85pin to 12V DC, 87a pin and 30pin are in series power supply 

circuits. Caution: Wrong connection of yellow wire will damage the tracker.

3. Wire for cutting off circuit of the tracker:  White wire connects relay pin 86, 86pin to 12V DC, 87a pin 

   and 30 pin are in series power supply circuits. Caution: Wrong connection of yellow wire will damage 

   The tracker.

4. Emergency triggering alarm

    The blue wire connects the positive of the alarm button, and the black wire connects the negative of

    the alarm button.

Application:

1. School Bus

2. Truck

3. Taxi

4. car

5. Bus

History Track:

Real time Tracking