Cuttable IP66 RS232 0.1W GPS Fuel Sensor For Tank Oil
Fuel Level Sensor For Tank Oil Level Measurement IP66 Automatic Calibration
Product description:
CLS2 Capacitor motor oil level sensor combined capacitor sensor and liquid level sensor.
The product not only contain the features of high precision measurement and maintenance-free, at the same time it doesn't influenced by temperature and medium.It can be automatically measuring error caused by different temperature or medium for precise compensation,achieving the purpose of accurate measurement.
The entire sensor machine doesn't contain any elasticity or moving parts.Impact resistance, maintenance-free, long service life, easy installation,can be installed in various occasions.Accurate measure for gasoline, diesel oil, hydraulic oil level and other various weak corrosive liquid level .
This liquid level sensor is level measuring instrument,contain high resolution ratio and measurement accuracy.It is automatic calibration which does not need manual intervention,no temperature drift, and is not affected by medium change.In other words,regardless of the measured medium is water or gas or diesel, no matter how temperature changes, it can output signal accurate liquid level height at one sensor. Completely solve the problem of measure medium difficulty ,like ethanol and methanol,and the problem of measurement error caused by oil’s label and great temperature difference in different areas.
Technical features:
| Examination area: | 100~1000mm |
| Resolution ratio: | 0.10% |
| Measuring accuracy: | 0.10% |
| The maximal error of measure: | 1mm |
| Heat-resistant: | -40~150 |
| Diameter: | Φ18mm |
| Output signal: | 4~20mA, 0~5V, RS485, RS232, CAN bus |
| Voltage supply: | DC7~42V |
| Rated supply: | 0.1W |
| Fixed type: | Screw installation M20X1.5 OR Flange mounting |
| Pressure range: | -0.1MPa ~ 0.1 Mpa |
| Ambient temperature: | -40~85℃ |
Fuel Level Sensor For Tank Oil Level Measurement IP66 Automatic Calibration
The entire sensor machine doesn't contain any elasticity or moving parts.Impact resistance, maintenance-free, long service life, easy installation,can be installed in various occasions.Accurate measure for gasoline, diesel oil, hydraulic oil level and other various weak corrosive liquid level .
cause analysis
1 Open circuit of the power or voltage too low Sensor fault
Wrong connection of the lines and wires 2 service voltage abnormal
external interference Sensor jammed Sensor fault
- service voltage abnormal external interference Sensor jammed autoadaptation uncomplete Sensor fault
- oil level flow
service voltage abnormal external interference Sensor fault
Instruction
definition of the output line
Interface output line use 6 core cable, connecting definition:
0~5V output [CLS2A]:
Black line connect ground wire Red line connect positive power
White line 0~5V voltage signal output,connect voltage signal wire Yellow line empty fuel tank use only
Green line full fuel tank use only
| RS232 | output [CLS2C] |
| Black line | connect ground wire |
| Red line | connect positive power |
| White line | RXD input, connect car RS232 TXD |
| Blue line | TXD output, connect car RS232 RXD |
| Yellow line | empty fuel tank use only |
| Green line | full fuel tank use only |
1.1Calibration
This sensor adopt high-speed MCU of CNC technology, adopting self-calibration Calculation , and leaves out the complicated Manual calibration while using in normal.
circumstance, the sensor can directly be used in the measurement of the diesel, if need to calibration, you can use the three following ways to complete. (each can work)
Fuel Level Sensor For Tank Oil Level Measurement IP66 Automatic Calibration
GPS Tracker Applications:
Other model of fuel sensor(ultrosonic fuel sensor)
Ultrasonic oil level sensor is the oil quantity monitoring equipment designed for management personnel of enterprise motorcade. It can prevent gasoline theft by drivers, optimize transportation cost, the driver’s driving action and assist statistical decision, etc. The sensor uses ultrasonic probe to detect the oil level height and carries out smart processing for height signal of oil quantity through built-in program of the main body. Then it sends the oil quantity information to the system platform through GPS to generate the oil quantity report after analysis. The sensor supports serial port and analog output and can connect with GPS of most brands/Beidou all-in-one machine. Therefore, the sensor can be connected with the backstage monitoring system easily.
The products adopt non-contact measurement ultrasonic wave sensor technology developed independently by our company and first created domestically and are widely used in fuel consumption monitoring projects for vehicles and sold overseas.
FAQ:
Do you have one GPS Tracker device that supports the fuel sensor?
Yes, all professional types of GPS trackers including V2E have the support of this type of fuel sensors.
How can I buy it?
We accept T/T, Western Union, and Paypal after payment cleared. then we will send goods to you.
What is your WhatsApp?
My WhatsApp is +8618673367060
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.