Roll Wrapped Carbon Fiber Tube Lightweight Pultrusion Carbon Composite Tube

Roll Wrapped Carbon Fiber Tube, Lightweight Pultrusion Carbon Fiber Tube
 

Pultruded carbon tubes are created by pulling linearly-oriented carbon fibers through a resin bath and then a series of tooling to create the specified inner and outer diameters of the tube. The carbon tube is then heated to cure it. Carbon tubes are especially stiff longitudinally, due to the unidirectional orientation of the fibers.

This type of profile has a high specific mechanical resistance (related to its weight), lightness, rigidity, great resistance to fatigue and vibrations, resistance to oxidation and corrosion, low coefficient of thermal expansion and durability.

Pultrusion is a technique of continuous production of linear profiles with a constant section. This process has many similarities to extrusion, the main difference is in the feeding system: in extrusion the material is pushed through the matrix (mould), in pultrusion it is extracted from the matrix. This procedure does not allow variations in shape, sections or curves. Products that can be obtained by this process can have sections or thicknesses of up to approximately 15mm, with epoxy resins and up to 70 mm with polyester resins.

Products made with this technology have excellent tensile strength properties due to the linear orientation of the fibres in the direction of axis of the profile; if it is also necessary to have a good transversal resistance, a woven fabric is used as a backing in specific quantities and weights.

Pultrusion is the name given to the continuous process of manufacturing composite materials and generally produces sections including tube, rod, box and angle with unidirectional alignment of the fibres.

Because they are pultruded, the carbon fibre tubes in this section have unidirectional fibre alignment which gives them the maximum possible strength along their length but leaves them less strong in other planes meaning that particular care needs to be taken to how the are fixed to reduce crush forces and spread any load as evenly as possible.

Carbon Tubes are the ultimate push rods since they contain 95% unidirectional carbon fiber running longitudinally and are covered with a light glass scrim. Our tubes are manufactured in a pultrusion process. This design offers a high stiffness to weight ratio.

Our Service:
 
1. It ensures that a year of quality assurance and 24 hours online customer service.
2. Protection of your sales area, ideas of design, and all your private information.
3. Request for samples is accepted.
4. Drilling and slotting are accepted.
5. We guarantee the products to be manufactured with the finest materials and mature technics.
All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.