Max 96 cores Fiber Optic Enclosures 8 Port Horizontally Glue Seal 7300g - 9600g
Max 96 cores Fiber Optic Enclosures 8 Port Horizontally Glue Seal 7300g - 9600g
Features:
- Convenient to increase or reduce trays/ cassette for capacity requirement
- Improved reinforce rebar on the body of closure make excellent performance under impact, pulling, tension etc
- 3 fixing item/designs to prevent fiber cable from external effect
- Spacious place for storing and maintenance
- adapter plug-in fits a variety of adapters such as SC, FC, LC (duplex).
- Can be used from 40 °C to +65°C temperature range
- Integrated seal, air tight and water proof, flame-retarded
- Suitable for aerial, wall, underground duct or direct burial application
OFS-FTH-503 Fiber Optic Splice Closure Datasheet
|
Model No. |
Size (mm) L×W×H |
Core capacity |
Cable Ports (max) |
Max diameter of cable (mm) |
Adapter and holes of Front Panel |
|
OFS-FTH-503 |
590x320x215 |
240 |
8 |
4×Ø41 |
FC adapters:48PCS |
|
SC adapters:96PCS |
|||||
|
4×Ø26 |
ST adapters:96PCS |
||||
|
LC adapters:96PCS |
Remarks:
- OFS-FTH-503 accommodates one set of elastic seal fitting for 8 inlet/outlet ports.
- Installation accessories provided: seal tape, insulation tape,3 pieces of special wrenches, abrasive cloth, earthing wire, nylon ties, labeling paper, measuring paper and desiccant.
- Accessories by customers’ selection: earthing device, buffer pipe for bunchy fiber, pressure testing valve, adapter panel, adapter, pigtail, patchcord, wall-mounting bracket and pole mounting bracket.
2 Main components
|
No. |
Name of components |
Quantity |
Usage |
Remarks |
|
|
1 |
Housing |
1 set |
Protecting fiber cable splices in whole |
Internal diameter: 500x205 (mm) |
|
|
2 |
Insert plate |
2 pairs |
Fixing the housing |
220x80x35(mm) |
|
|
3 |
Fiber optic splice tray (FOST) |
Max 10 pcs (bunchy Max 9 pcs (ribbon) |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:24,36,48,72(cores) Ribbon:6,12,18 (pieces) |
|
|
4 |
Fixing bracket |
1 set |
Fixing fiber cable and reinforced core |
|
|
|
5 |
Foundation |
1 set |
Fixing FOST |
|
|
|
6 |
Seal fitting |
1 set |
Sealing between FOSC cover and FOSC bottom |
|
|
|
7 |
Port plug |
8 pieces |
Sealing empty ports |
|
|
|
8 |
Pressure testing valve |
1 set |
After injecting air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
|
|
9 |
Earthing deriving device |
1 set |
Deriving metallic components of fiber cable in FOSC for earthing connection |
Configuration as per requirement |
|
2.3 Main accessories and special tools
|
No. |
Name of accessories |
Quantity |
Usage |
Remarks |
|
1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
|
2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
|
3 |
Insulation tape |
1 roll |
Enlarging diameter of fiber cable for easy fixing |
|
|
4 |
Seal tape |
1 roll |
Enlarging diameter of fiber cable which fits in with seal fitting |
Configuration as per specification |
|
5 |
Hanging hook |
1 set |
For aerial use |
|
|
6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
To put through as per actual requirement |
|
7 |
Abrasive cloth |
1 piece |
Scratching fiber cable |
|
|
8 |
Labeling paper |
1 piece |
Labeling fiber |
|
|
9 |
Special wrench |
3 pieces |
Fixing bolts, tightening nut of reinforced core |
|
|
10 |
Measuring paper |
1 piece |
To measure perimeter, of which the diameter is enlarged with seal tape |
To measure perimeter with the corresponding measuring paper |
|
11 |
Buffer tube
|
decided by customers |
Hitched to fibers and fixed with FOST, managing buffer |
Configuration as per requirement |
|
12 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air. |
|
|
13 |
Rubber hammer |
1piece |
Knocking in or knocking out inset plate |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.