20K 1000W Rotary Ultrasonic Machining, High Quality Drilling or Milling For Ceramic

Description: 

Ultrasonic milling is a new type of ultrasonic processing technology, which USES simple shape tool, based on hierarchical in rapid prototyping manufacturing, using the method of layered removal machining hard and brittle materials, it has a simple tool making, small macro forces between tool and workpiece, tool wear can be compensated, which can realize complex three-dimensional contour machining, etc.

Main parts:

Power Source: As we know, this machining process requires high frequency ultrasonic wave. So a high frequency high voltage power supply require for this process. This unit converts low frequency electric voltage (60 Hz) into high frequency electric voltage (20k Hz).

Technical Parameters:

Advantages:

1. It is not limited by the conductivity of materials. It is suitable for punching, cutting, grooving, nesting, engraving, etc. of various hard and brittle materials such as glass, quartz, ceramic, silicon, ferrite, gemstone and jade. Batch deburring of small parts, surface polishing of the mold and dressing of the grinding wheel.

2. The processing precision is high and the surface quality is high. The aperture diameter of ultrasonic drilling is 0.1~90mm, the processing depth can reach more than 100mm, and the precision of the hole can reach 0.02~0.05mm. The surface roughness of the glass treated with W40 boron carbide abrasive can reach 1.25~0.63um, the processed hard alloy can reach 0.63~0.32um, and the processed surface has no structural change, residual stress and burn.

3. The tool has small macroscopic force on the workpiece, small heat influence, can process thin wall, narrow slit and sheet workpiece, and can process various complex cavities and profiles as long as the workpiece is made into corresponding shapes and sizes.

Applications:

• This machining is used to machine hard and brittle material like carbide, ceramic, glass etc.
• This is used in machining of die and tool of drill, wire drawing machine etc.
• Used in fabrication of silicon nitrite turbine blade.
• It is used to cut diamond in desire shape.
• It is used machining of machining non-conductive hard material which cannot be machined by ECM or EDM due to poor conductivity.