Anti Aging FKM Mechanical Fuel Injector O Rings Mild Acidic / Alkali Resistance

Anti Aging FKM Mechanical Fuel Injector O Rings Mild Acidic / Alkali Resistance

FKM has outstanding resistance to heat, water and steam, alkali, mild acidic and oxygenated solvents, ozone, and sunlight (-25ºF to +275ºF); but it is not recommended for gasoline, petroleum oil and grease, and hydrocarbon environments. This popular rubber compound is usually the first choice for low torque drive belt applications

Standard Color: Black

Key Use(s): Outdoor weather resistant uses. Automotive brake systems. Automobile cooling systems. Water applications. Low torque drive belts.

Temperature Range
Standard Compound: -25° to +275°F
Special Compound: -40° to +302°F

Hardness (Shore A): 50 to 90

Features: When compounded using peroxide curing agents high temperature service can reach +350°F.  Good resistance to acids and solvents (i.e. MEK ). 

Limitations: Have no resistance to hydrocarbon fluids.

Detailed Images:

Process Flow:

Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection

→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing

Packing & Delivery:

Packing: PE bag inside, Carton outside.

Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm

Delivery: Large quantity by ship, small quantity by air or express.

FAQ:

1,Are you manufacture or trading company ?

We are manufacture, we have two factories, one located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province

2,Can I get samples from you ?

Of course, you can. If the samples you need we have in stock, you can get them for free,

only need to pay for the express cost.

3,What's the term of payment ?

Amount < US$2000, 100% paid in advance by paypal or T/T;

Amount >= US$2000, 30% paid in advance, 70% balance before shipment by T/T.

4,Can you produce OEM products ?

Yes, we can produce products by your drawing or samples.

5,What's your MOQ ?

If we have the products in stock , the quantity by your requirement, If we don't have them in stock:

NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$