bouncing device,breaks the film and separates the paper.
NFY-A800 Film Laminator High Speed Automatic Thermal Laminating Machine
Price:
US 31300 Set
MOQ:
1 Set
Delivery Time:
60 days
Brand:
PRINTYOUNG
Product Description
NFY-A Automatic Thermal Laminating Machine
Features
NFY-A series laminating machine is an economical pre-coating type laminating machine specially designed for small paper. as a professional equipment used for plastic film laminating on the surface of paper,Widely applicable for laminating in advertising poster, Picture books and magazine,display book,color paper box,
calendars,and commercial cards fields,Improving the printing matter grades,and achieve the purpose of dustproof, waterproof,oil proof.
*Thermal laminating (Pre-coating /thermal film)
*Film:OPP, BOPP,SOFT TOUCH FILM.
*Film:OPP, BOPP,SOFT TOUCH FILM.
Technical Parameters
|
Model
|
NFY-A800
|
|
Max. Laminating Width
|
780 mm
|
|
Max. Sheet Size
|
780*800mm
|
|
Min. Sheet Size
|
260*210mm
|
|
Paper Feeding Pile
|
1000mm
|
|
Heating Roller Diameter
|
380mm
|
|
Paper Thickness
|
105 ~ 500 gsm
|
|
Laminating Speed
|
5~100 m/min
|
|
Pre-Glue Film Thickness
|
12 ~ 25μm
|
|
Max. Film Roll Diameter
|
Φ600mm
|
|
Total Power
|
25 kw ( 380 V AC3Φ50 / 60 HZ)
|
|
Working Power
|
18kw / h
|
|
Installed Power
|
40 KVA
|
|
Dimension(L x W x H)
|
6048*1735*1920 mm
|
|
Weight
|
4550KG
|
|
Loading
|
20GP foot container
|
Configuration
Feeding Unit
1.High Speed Feeder,4 suckers for lifting and 4 suckers for conveying structure.
Max Speed 12000 sheets/h
2.The paper feeding table has upper and lower over-limit protection
3.The height of non-stop feeding can reach 1150mm,pre-stacking device,non-stop feeding
4.BECKER Vacuum pump
2.The paper feeding table has upper and lower over-limit protection
3.The height of non-stop feeding can reach 1150mm,pre-stacking device,non-stop feeding
4.BECKER Vacuum pump
Conveying Table and Overlap
1.The conveying table adopts customized stainless steel corrugated board
2.The brush wheel and rubber pressing wheel move smoothly
3.Servo motor overlap,improve accuracy of lap,error≤±2mm
2.The brush wheel and rubber pressing wheel move smoothly
3.Servo motor overlap,improve accuracy of lap,error≤±2mm
Laminating Unit
1.The hot-press steel roller (Dia.380mm) adopts electromagnetic heating system,
Rapid heating,energy saving and environmental protection.
2.The pressing pressure is controlled by two sets of hydraulic cylinders and an automatic hydraulic system,which can balance the pressure on the upper and lower rollers
3.The surface of the pressure roller is covered with a special strength rubber layer.
4.Touch screen control board,The Internet of things,long remote control.
2.The pressing pressure is controlled by two sets of hydraulic cylinders and an automatic hydraulic system,which can balance the pressure on the upper and lower rollers
3.The surface of the pressure roller is covered with a special strength rubber layer.
4.Touch screen control board,The Internet of things,long remote control.
Cutting Part
1.The cutting unit adopts a round (flying) knife device,matched with a bouncing paper break device,and is easy to adjust.It can ensure effective cutting of paper thick more than 105g/m² and is suitable for OPP,BOPP film slitting.
2.Includes paper anti-curl device,which can effectively avoid curling phenomenon after thin paper laminating film break.
3.The paper cutter adopts frequency conversion speed control,which can be co-adjusted with the laminator speed.
4.The bouncing device ensures that the film breaks quickly after the disc knife cuts the film.
5.PLC programmable module linkage system,which automatically increases or decreases according to the speed of the laminating host.
2.Includes paper anti-curl device,which can effectively avoid curling phenomenon after thin paper laminating film break.
3.The paper cutter adopts frequency conversion speed control,which can be co-adjusted with the laminator speed.
4.The bouncing device ensures that the film breaks quickly after the disc knife cuts the film.
5.PLC programmable module linkage system,which automatically increases or decreases according to the speed of the laminating host.
The machine runs,resting the perforating blade on the edge of the film and punching holes in the film,and finally,through the
bouncing device,breaks the film and separates the paper.
bouncing device,breaks the film and separates the paper.
Automatic Paper Collecting Part
1.Wave-type paper delivery mechanism,conducive to thin paper collection
2.The counter,the paper receiving reaches the set number,it will stop automatically
3.Blowing device is conducive to tissue collection
4.Front and right paper patting device;paper delivery is neat and clean
2.The counter,the paper receiving reaches the set number,it will stop automatically
3.Blowing device is conducive to tissue collection
4.Front and right paper patting device;paper delivery is neat and clean
Applications
Widely applicable for laminating in packaging,paper box,books,magazines,calendars,carton, handbags,Gift box,Wine packaging paper improving the printing matter grades,and achieve the purpose of dust-proof,water-proof,oil proof.It’s the best choice for printing and laminating enterprises of all scales.
Q1.Are you a manufacturer or a trading company?
A:Our shanghai office is mainly doing export.We have our own factory in Wenzhou,Zhejiang Province.
Q2.What is the machine warranty?
A:One year.After the warranty,we still provide technical support to buyer at low cost.
Q3.What is the production time while placing order?
A:Normally about 10-20 days.
Q4.What is the delivery time?
A:15-30days after deposit.
Q5.Can your company handle shipping for customers?
A:Yes,just give us destination sea port or container yard.
Q6.Does the packing strong?
A:Yes.Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions.A full set of maintenance and operation manuals is included.
Q7.How about the machine installation and training?
A:1)We provide training in our factory for free;
2)We can send technicians (engineers) to your factory for installation and training.
You shall pay the round trip air fare and accommodations,plus each technician charges USD100/per day.
Q8.Do you have machines in stock?
A:For standard model,we have a large quantity in stock.For special model,we need 20-30 days to produce it for you.
Q9.How can you assure the machines’ quality?
A:Each machine will be test running at least 24 hours before delivery to assure the quality.
And during the warranty,we will give spare parts for free if machine has any problem.
Q10.Do you inspect machines or test running before packing?
A:Of course we do.We have QC department to debug the machine before packing.
If you want to use specific material to do the test running,you need to pay for the cost of the material.
Q11.What’s the payment term?
A:T/T 30% in advance,the balance shall be paid before delivery.We also accept payment by West Union or L/C at sight.
Q12.Do you accept factory visiting?
A:Warmly welcome for your visiting.
Q13.How many years are you in printing field?
A:The Shanghai company since in 2008,the factory is more than 25years.
Q14.How many clients do you have?
A:We have sold our machines to about 60 countries.We have agents in South Africa,Morocco and Italy.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai Printyoung International Industry Co.,Ltd
Location
Room 27B, NO,58 New Jinqiao Road, Pudong, Shanghai, China 201206
Contact Person
Caren