Ford Air Suspension Kits Heavy Duty Rear Air Spring Left Right Air Spring 1992-2011
Brand New Rear Air Suspension Shock Absorber kit rear Air Spring for FORD CROWN VICTORIA - 1992-2011 (4.6 LITER V8)
The Ford Crown Victoria air spring bladder has a tested burst pressure of more than 480 PSI ... 6 times its working pressure! We arer so confident in the reliability of its aftermarket Ford air springs that they are backed by a one year warranty.
NOTE: We recommends changing the Ford Air Dryer when replacing Crown Victoria Air Springs. System moisture damages your compressor.
Descriptions:
- Position: Fits Rear Left or Right
- Replaces dealer part numbers: 3U2Z5580AA, 3U2Z5580BA, 3U2Z5580PA, 6W1Z5560AA, FOVY5560A
- Includes O Ring Seal Kits
- Sold individually
- Direct replacement
- Built to strict quality control standards
- 12 months warranty
Brand NEW fitting for the following years and models:
1992-2011 Ford Crown Victoria Rear
1990-2011 Lincoln Town Car Rear
1992-2011 Mercury Grand Marquis Rear
Features:
• Heavy-Duty Air Springs.
• Burst Pressure Tested to Over 480 PSI.
• Pre-Assembled for Fast Installation.
• Installation Manual & Video Available.
• One year arranty.
Things to know about air spring:
2). Familiarize yourself with the suspension on which you are performing the repair by reviewing the
3). If you are in doubt about something, ask for assistance from a qualified suspension specialist, the
2).Check that the shock absorber for leakages and take a shock absorber test. A defective shock
Once the air lines are disconnected, check their entire length for cracks or other damage. Replace
With the air spring removed, other parts of the air suspension become more accessible. Check for
3).Check bearing for air spring bellow for external damage, deformation, sharp edges and correct
4).Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to
5).Always use new attaching bolts for the installation and observe the tightening torques. Never use
6).Check the linkage of the levelling valve to see that it is functioning properly. Under load, the linkage
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.