AZ31 Magnesium Alloy Plate Fit Seawater , Magnesium Fuel Cell Salt Battery

AZ31 Magnesium plate for sea water magnesium fuel cell Salt Battery

Detail Information:

Magnesium alloy Plate & sheet for salt battery,

Salt water magnesium battery

Magnesium air battery

Shape: Rods / Bars / Plate / Sheet

Sheet Thickness: 1.0mm , 0.5 mm, 0.1mm, 0.04 mm , 0.08 mm etc.

Rod diamter: 8 mm, 10 mm, 16mm, 18mm, 21mm, 26mm etc.

Grade: AZ31 / AZ61 / AZ91

Magnesium Plate for Salt batteries are batteries with magnesium as the active element at the anode of an electrochemical cell. Both non-rechargeable primary cell and rechargeable secondary cell chemistries have been investigated. Magnesium primary cell batteries have been commercialised and have found use as reserve and general use batteries.

Magnesium secondary cell batteries are an active topic of research, specifically as a replacement for or improvement on lithium ion based battery chemistries - as a Li-ion replacement magnesium cells may be possible with a solid magnesium anode, allowing a higher energy density than that with lithium, which requires an intercalated lithium anode. Insertion type anodes ('magnesium ion') have also been researched.

The sheet and plate shall conform to the tensile requirements in above Table unless other agreement is made between seller and purchaser. Mechanical Properties for sizes and tempers not shown in above Table shall be as agreed upon by seller and purchaser.

SURFACE TREATMENT

All the normal chromating, anodizing, plating, and finishing treatment are readily applicable. AZ31B also responds well to plasma electrolytic oxidation finishing