Bar Shape Water Heater Anode Replacement , Gas Water Heater Rod Anode
3/4''NPT Magnesium Anode Rod for Water Heater Tanks
Water heater anode rod or sacrificial anode is the important component part with only one purpose to protect metal tank from corrosion.Extruded Alumnium anodes and Magnesium anodes have high current to weight ratio,are suitable to be used in where a small diameter anode is required to give enough cathodic current.
High Broad supply extruded anodes in both high potential (Mg-Mn alloy),standard potential (AZ31 alloy,AZ63 alloy) and Alumnium Alloy.Our extruded anodes are typically suitable for all kinds of water storage tanks or in prepolarization of offshore structure and so on.
| Diameter(inch) | Core eccentric(inch) | Core diameter(inch) | Straightness(inch/2 ft length) | Weight(lbs/inch) |
| Magnesium Extruded rod | ||||
| 0.0675-0.020 | 0.050 | 0.135 | 0.060 | 0.025 |
| 0.750-0.020 | 1/16 | 0.135 | 0.040 | 0.031 |
| 0.800-0.020 | 1/16 | 0.135 | 0.040 | 0.035 |
| 0.840-0.020 | 1/16 | 0.135 | 0.040 | 0.038 |
| 0.900-0.020 | 1/16 | 0.135 | 0.040 | 0.043 |
| 1.050-0.020 | 1/16 | 0.135 | 0.040 | 0.057 |
| 1.315-0.020 | 1/16 | 0.135 | 0.040 | 0.089 |
| Aluminum Extruded rod | ||||
| 0.576-0.020 | 0.050 | 0.135 | 0.060 | 0.038 |
| 0.750-0.020 | 1/16 | 0.135 | 0.050 | 0.048 |
Because it is hand-cut, length maybe 1 cm error
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.