Excellent Quality pet food machine/dog food extrusion line dog food extruder

Introduction:

Singe Screw Pet Treats Machine  takes starch as raw materials with scientific configuration and was extruded from co-extrusion, it can be made into many kind of shapes such as stick,bone ect. This kind of food not only provide protein,fat,vitamin ,nutrition for dogs, but also satisfy the dog nature hobby. It has following features: strong teeth, clean mouth and teeth, good for diet. The products can be in many shapes, like twist, double colors, core-filling and so on.

Flow chart: Raw Material Mix – Screw Conveying – Extruding – Cooling – Cutting – Drying -- Cooling

Technical Parameters

- Dog Chewing Food Machine can produce dog chew snacks and semi moist pet food. 

- It combines two processing lines into one: pet snacks and semi-moist pet food.

- With different moulds, various shapes can be made, such as strip, stick, screw shape, etc.

- All kinds of perfectly shaped non-crumbing chew snacks in a variety of color combinations.

- Max. 3-color chew snacks can be produced.

- Various shapes can be made, such as strip, stick, bone, screw shape, etc. 

- Many kinds of recipes to make different tastes to meet different market demands.

- Turnkey project provided, from raw materials to packing procedures, fully continuous and automatic.

- Fully stainless steel 304.

MK-100 Single Screw Extruder serves to gelatinize flours and starches continuously and automatically. After dosing, the materials are worked by one screw composed by sectional modules for the following functions: forward and backward transport, mixing, feeding of additives, injection of liquids, de-gassing, cooking and forming.

1.PLC and 10” touch screen with friendly interface to control the whole line, not one or two single equipment;

2. While any parts got problems, the fault alarm will be shown on the touch screen;

3. Password can be set on the touch screen to avoid any misoperation by the workers;

4. The structure is made by carbon steel, and the cover body, mixing tank and all the parts in contacting with the raw material are made by stainless steel 304;

5. A wide range of products can be obtained in a variety of different ways, and can configure various dies simply and rapidly;

6.Two sets of Single Screw Extruder can work together to make double-color pet treats, also can connect Twisting Device for twist pet treats;

7. The use of a continuous automatic process provides greater production outputs than offered by traditional systems, with savings in energy and reduced management cost;

8. Automatic dosing unit for utilization with any type of flours and starches (the size should be 60-80 mesh);

9. The screw is all made by 38CrMoALA alloy, and the surface is being processed nitrogen treatment, so the hardness could reach 55hrc, which is hard and strong, and has longer service life;

10. Barrel is divided into 5 temperature zones, and each zone is controlled separately;

11. Auto-temperature control system; make the temperature controlling more direct viewing and the parameter more precise;

12. Equipped wit cooling system for cooling the barrel and screw;

13. Control cabinet has three kinds of protections: overload protection, overcurrent protection and overheat protection.

14.Nice appearance with streamline modelling.

Machinery Show