60W Long Strip Sensor Dim Led Driver, 200-350mA Output, Flicker-free, Built-in Installation

Price Negotiable

Price: Negotiable

MOQ: 100PCS

Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.

Brand: Merrytek

Product Description

60W Long Strip Sensor Dim LED Driver, 200-350mA Output, Flicker-free, Built-in Installation

Product Features

Metal strip non-isolated power supply; flicker-free PWM dimming power supply
12V auxiliary power supply; compatible with different sensor and wireless smart modules
High performance with high efficiency, high PF value and low stand-by power
Conforms to new ERP standard and complies with CE, SAA certification standards
Built-in power supply suitable for strip lamps; parameters adjustable via DIP switches

Technical Parameters

Product No.		MLC60C-NPS
Input	Voltage Range	198-264Vac 50Hz/60Hz
	Input Current	0.3A (@230Vac full load)
	Operating Voltage	220-240Vac 50Hz/60Hz
	No-load Power	≤0.3W
	Stand-by Power	≤0.3W
	Power Factor	≥0.95 (@230Vac full load)
	Working Efficiency	90% (230V Max load)
	THD	≤20%(@230V ac full load)
	Leak Current	<0.5mA/240V
	Surge Current	<22A (100us half-current) @230Vac
Output	Working model	Constant Current
	Type of load	LED
	Start Time	≤1S (@230Vac full load)
	Ripple Current	±5% (@230Vac full load, LED full load)
	Strobe Frequency Requirement	Flicker free (≤5%)
	No-load Output Voltage	200Vdc Max
	Load Power	61.25W Max
Connecting Port	PWM	Yes (5V and 3.3V PWM signals are compatible)
Connecting Port	Port Connecting Method	3PIN PH2.0 row needles terminal
Auxiliary Power Supply		12V±1V, Max100mA
Protection Requirements	Operating Temperature/Humidity	-25℃~+50℃
	Storage Temperature/Humidity	-40℃~+80℃ Humidity: 85% (Non-condensing)
	Atmospheric Pressure	86~106KPa
	Lightning Surge	LN:1KV
Certificate Standards		EN61347-1, EN61347-2-13, EN55015, EN61547, EN61000-3-2, EN61000-3-3
Environmental requirement		Compliant to RoHS
Certificate		CE SAA
Output Current Accuracy		±5%
Wiring		Press terminal, wire diameter: 0.5-1.0mm²
IP Rating		IP20
Protection Class		Class II
Installation		Built-in
Dimension		1953021mm
Net Weight		138g±3g
Warranty		Five years warranty (Ta=50℃@230Vac full load)

Product Characteristic Testing

Product Information

Installation

DIP Switch Setting

Initialization

After power-on, it is half bright, and after self-test, it enters the 0-10V / PWM port voltage setting brightness (suspended for full bright).

Application Notice

Please use product according to specifications. Failure may occur if the product is used beyond the service conditions.
Connect loads firstly before turning on the input power; otherwise, load may be damaged.
After the LED drive input power is off, the output end still has residual voltage, which can be maintained for about 3 minutes.
This product is a non-isolated power supply:
- To avoid electric shock, do not operate with power on before connecting load.
- To avoid damaging sensing head, power off is also required before connecting.