45W Isolated Sensor DIM Led Driver, With PWM Dimming Terminal, 600-1050mA Current

Price Negotiable

Price: Negotiation

MOQ: 100PCS

Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 3-4 weeks after receiving deposit.

Brand: Merrytek

Product Description

45W Isolated Sensor DIM Led Driver, With PWM Dimming Terminal, 600-1050mA Current

Product Features

Isolated two-stage circuit frame, full dimming and flicker-free
Support DIP switches to set the current gear
Support 12V auxiliary power supply, with sensing split head can achieve integrated sensing function
Equip with PWM dimming control port
Suitable for various microwave sensors or wireless smart modules

Technical Parameters

Output
Product series	MLC40C-PS1
Rated voltage	220-240V AC 50Hz/60Hz
Stand-by power	≤0.5W(Equip with Merrytek 5.8Ghz sensing split head)
Surge	1KV(L/N,EN61000-4-5)
Power factor	≥0.95 (230V Max load)
Input current	≤0.23A @230VAC full load
Inrush current	<20A(100us half-current)@230V AC
Working efficiency	≥86% (230V Max load)
Working model	CC
Type of load	LED
Flick	≤5%
Constant current accuracy	Constant current accuracy ±5%
Auxiliary driver parameters	12VDC Current: 100mA Max
No-load output voltage	60VDC Max
Full load power	40W Max
Load current	600mA / 650mA / 700mA / 750mA 800mA / 850mA / 900mA / 950mA 1000mA / 1050mA
Load output voltage range	600mA / 9-42VDC 650mA / 9-42VDC 700mA / 9-42VDC 750mA / 9-42VDC 800mA / 9-42VDC 850mA / 9-42VDC 900mA / 9-42VDC 950mA / /9-42VDC 1000mA / 9-40VDC

Abnormality Protection Requirements

Protection mode	Input overvoltage protection \| Input no-load protection \| Input short circuit protection

Environmental Requirements

Operating temperature	Built-in: -25…+50℃
Maximum shell temperature(Tc)	85℃
Storage temperature/humidity	-40℃…+80℃ Humidity: ≤85% (non-condensation)

Certificate Standards

Certificate	CE,UKCA,SAA
Environmental requirement	RoHS2.0, Reach requirement
Safety standards(LVD)	EN61347-1, EN61347-2-13
EMC standards	EN55015, EN61547, EN61000-3-2, EN61000-3-3
Withstand voltage	Primary to secondary: 3.75KVAC Primary to ground :1.5KVAC
IP Rating	IP20
Product Category	Class I

Others

Wiring method	Press terminal, wire diameter:0.5-1.0mm2
Installation	Built-in
Package	PE bag clapboard, carton(K=A)
Net weight	174±5g
Lifetime	5 years warranty@Ta 230V full load

Split Head Collocation

Product Information

Wiring and function

Dimension (Unit:mm)

Parameter Curve

Life Time Curve

Output Current Setting

Output current	Voltage range	S1	S2	S3	S4
600mA	9-42V	-	-	-	-
650mA	9-42V	-	-	-	ON
700mA	9-42V	-	-	ON	-
750mA	9-42V	-	-	ON	ON
800mA	9-42V	-	ON	-	ON
850mA	9-42V	-	ON	ON	-
900mA	9-42V	-	ON	ON	ON
950mA	9-42V	ON	ON	-	ON
1000mA	9-40V	ON	ON	ON	-
1050mA	9-38V	ON	ON	ON	ON

Initialization

When powered on, it is steady on. When the sensor is configured, it changes according to the status of the sensor.

Default Setting

Adjust the corresponding current gear according to the order or customer demand.

Application Notice

Please use this product in accordance with the specifications. Failure may occur if the product is used beyond the use conditions.
The product should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switches.
The load LED string must be connected first, and then turn on the input power, otherwise it may damage the LED string.
After the LED drive input is powered off, there will be residual voltage at the output end, which can be maintained for about 3 minutes.