IP20 Indoor Low Voltage Dali LED Dimming Driver 30 Watt 16 - 58 Vdc Class II
IP20 Indoor Dali LED Dimming Driver 30 Watt 16 - 58 Vdc Class II
Description:
- Built-in DALI interface.
- Support Push dimming function.
- Multi output current 250mA to 700mA selectable via DIP switch.
- Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.
- No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.
- Maximum length of the cable, from push button to last driver is 20m
- Press-in terminals in primary and secondary side, easy assembly
- Protection: Short circuit / Over voltage / Over temperature
- 5 years guaranty
Specifications
|
INPUT
|
Input voltage |
220-240Vac |
|
Input frequency |
50-60Hz |
|
|
Input current |
0.16A max |
|
|
Power factor |
≥0.90 |
|
|
Efficiency(Note1) |
≥85% |
|
|
Leakage current |
＜0.5mA/240Vac |
|
|
OUTPUT
|
Output current and load |
250mA 16-60Vdc 15W max, 350mA 16-60Vdc 21W max 400mA 16-60Vdc 24W max, 450mA 16-60Vdc 27W max 500mA 16-58Vdc 29W max, 550mA 16-55Vdc 30W max 600mA 16-50Vdc 30W max, 700mA 16-43Vdc 30W max |
|
Output load range |
1x30W max |
|
|
Current accuracy |
±5% |
|
|
Dimming mode |
DALI, PUSH |
|
|
ENVIRONMENT
|
Working temp.(Ta) |
-20~50℃ |
|
Surface temp.(Tc) |
85℃max |
|
|
Working humidity |
20~90%RH non-condensing |
|
|
Storage temp. |
-40~80℃ |
|
|
Life time |
≥50000hours |
|
|
PROTECTION
|
Isolation class |
Class II, SELV |
|
Protection class |
IP20 |
|
|
Short circuit |
Protection type; auto rest |
|
|
Over voltage |
Protection type; auto rest |
|
|
Over temperature |
Protection type; auto rest |
|
|
SAFETY&EMC
|
Safety |
EN61347-1 EN61347-2-13 |
|
EMC |
EN55015, EN61000-3-2ClassC |
|
|
EN61000-3-3, EN61547 |
||
|
DALI interface |
IEC62386-101, IEC62386-102, IEC62386-207 |
|
|
Approvals |
CE |
|
|
Withstand voltage |
IN-OUT:3.75KVAC/5mA/1min |
|
|
NOTE |
1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25℃of ambient temp. |
|
Mechanical Specification:
Dimming Operation:
PUSH Dim
Short push (<0.1sec): Ignore, to avoid reaction on AC spike.
Short push (0.1~1sec): Switch on or off.
Long push (>1sec): Dimming up or down, dimming automatically stops at minimum or maximum value.
Wring Diagram:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.