20W Sensor Driver Detachable DIM LED Driver for LED tri - proof light
20W Sensor Driver Detachable DIM LED Driver for LED tri - proof light
Description:
1, Optional Output constant current can be set via DIP switch.
2, Automatic switching and dimming based on motion and ambient light level
3, Integration of microwave motion sensor, daylight sensor and LED power supply
4,Unique design with mini sensor detector makes the drivers suitable to fix within compact luminaries.
5, Detection area, time delay, daylight threshold, stand-by dimming time and stand-by dimming level can be set via DIP switch.
The products supply a simple energy-saving solution for LED ceiling light and tri-proof light. The mini detector is separated from LED power supply, unique design makes the drivers can be installed in luminaries which have limited space.
Specifications
|
INPUT
|
Input voltage | 220-240Vac |
| Input frequency | 50-60Hz | |
| Input current | 0.118A max | |
| Power factor | ≥0.90 @230v full load | |
| Efficiency | ≥80% | |
| Stand-by Power | ≤1W | |
|
OUTPUT
|
Output constant current | 300mA/ 320mA/ 350mA/ 380mA/ 400mA/ 450mA, set via DIP switch |
| Output voltage | 28Vdc – 42Vdc | |
| Current accuracy | ±5% | |
| Output Power | 18.9W Max. | |
|
DETECTOR |
HF system | 5.8Ghz±75Mhz, ISM wave band |
| Transmitting power | ＜0.5mW | |
| Detection range | 4m (@ 3m mounting height) | |
| Detection area | 50%/ 100% | |
| Hold time | 5s/ 90s/ 3min/ 10min | |
| Daylight sensor | 5lux/ 15lux/ 30lux/ Disable | |
| Stand-by period | 0s/ 30s/ 10min/ +∞ | |
| Stand-by DIM level | 10%/ 25% | |
| Mounting height | 6m Max. | |
| Motion detection | 0.5~3m/s | |
| Detection angle |
150° (Wall installation) 360° (Ceiling installation) |
|
|
ENVIRONMENT
|
Working temp.(Ta) | -20~50℃ |
| Surface temp.(Tc) | 85℃max @230v full load | |
| Working humidity | 20~85%RH non-condensing | |
| Storage temp. | -35~80℃ | |
| Life time | ≥30000hours | |
|
PROTECTION
|
Isolation class | ClassⅡ |
| Protection class | IP20 | |
| Short Circuit | Protection type: auto reset | |
| Over voltage | Protection type: auto reset | |
| No-load | Protection type: auto reset | |
|
SAFETY & EMC |
Safety | EN61347-1 EN61347-2-13 |
| EMC | EN55015; EN61000-3-2 | |
| EN61000-3-3, EN61547 | ||
| Approvals | TUV, RoHS | |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min |
Mechanical Specification:
Wring Diagram:
Detection Pattern:
Function:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.