28W Microwave Sensor Driver Multiple Constant Current 450mA / 550mA / 600mA / 700mA
28W Microwave sensor driver multiple constant current 450mA / 550mA / 600mA / 700mA
Description:
1, Stand-by power ≤1W.
2, Support mounting height up to 6m Max.
3, Stand-by dimming level is optional, 20%
4, Compact size makes the drivers suitable to fix within most LED ceiling lights.
5, Working mode: Auto switch on/off or dimming by motion and ambient light level.
6, Integration of microwave motion sensor, daylight sensor and LED power supply technology, save labor cost for installation.
7, Detection area, time delay, daylight threshold, stand-by dimming time and stand-by dimming level can be set via DIP switch.
Specifications
| Model | MLC28C-PE 1 |
| Operating voltage | 220~240Vac, 50/60Hz |
| Output constant current | 450/550/600/7h0 0mA, set via DIP switch |
| Output voltage | 22-40Vdc |
| Efficiency | ≥80% |
| Power factor | ≥0.9 |
| HF system | 5.8GHz±75MHz, ISM wave band |
| Transmitting power | <0.5mW |
| Power consumption | ≤1W(standby) |
| Detection zone Max.(D x H) | 16m x 6m |
| Detection sensitivity | 10% / 50% / 75% / 100% |
| Hold time | 5s / 90s / 3min / 10min |
| Corridor function | 0s / 30s / 10min / Disable |
| Daylight sensor | 5lux / 15lux / 50lux / Disable |
| Stand-by dimming level | 20%, can be customized |
| Mounting height | 6m Max. |
| Motion detection | 0.5~3m/s |
| Detection angle |
150° (Wall installation) 360° (Ceiling installation) |
| Working temperature(Ta) | -20 ~45℃ |
| Size (ФxH) | 82x28.5mm |
| IP rating | IP20 |
Mechanical Specification:
Wring Diagram:
Function:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.