Needle Antenna Microwave Motion Sensor DC Operate With High / Low Level Signals
DC Operate with Needle Antenna Microwave Motion Sensor , High and Low Level Signals , PWM Signals
Description
1) Patented needle antenna design solves the problem of instability of the sensor built-in backside of metal LED plate.
2) 5.8GHz high frequency microwave
3) Adjustable detecting sensitivity via DIP switches, suitable to variety of installation sites.
4) Compatible control mode of high and low level signals and PWM signals.
Function:
ON-OFF function
2-step dimming function
3-step dimming function
Detection Patter:
Ceiling mounting
|
Ceiling mounted height: 3m Sensitivity: 100%/75%/50%/25% |
Ceiling mounted height: 4m(*) Sensitivity:100%/75% |
|
Normal moving (Speed:1m/s) |
Normal moving (Speed:1m/s) |
|
Slow moving (Speed 0.3m/s) |
Slow moving (Speed: 0.3m/s) |
*Only 100%/75%/50% detection sensitivity is workable when installed at 15m mounting height. 25% sensitivity is not able to detect motion signal.
Wall mounting
|
Horizon mounted height: 2m Sensitivity: 100%/75%/50%/25% |
|
|
Normal moving (Speed:1m/s) |
Slow moving (Speed 0.3m/s) |
Specifications:
|
DC Input Voltage |
12±2V DC |
|
Rated Voltage |
12±0.6V DC |
| HF system | 5.8GHz±75MHz, ISM wave band |
|
Stand-by Power |
≤0.5W |
| Transmitting power |
0.5mW Max. |
| Detection zone Max.(D x H) | 6m x 4m |
| Motion detection | 0.3~3m/s |
| Detection angle | 150°(wall installation) 360°(ceiling installation) |
| IP rating | IP20 |
| Operation temperature |
-25℃…+60℃ |
| Hold time |
5S/90S/3min/10min |
|
Detection Area |
100%/75%/50%25% |
| Daylight sensor |
5lux/15lux/50lux/+∞ |
|
Stand-by DIM Level |
20% |
| Life time | 50,000 hours |
| Guaranty | 5 years |
DIP Switch Setting
Detection Area (Sensitivity)
| 1 | 2 | ||
| Ⅰ | ON | ON | 100% |
| Ⅱ | - | ON | 75% |
| Ⅲ | ON | - | 50% |
| Ⅳ | - | - | 25% |
Hold Time
| 3 | 4 | ||
| Ⅰ | ON | ON | 5S |
| Ⅱ | - | ON | 90S |
| Ⅲ | ON | - | 3min |
| Ⅳ | - | - | 10min |
Daylight Sensor
| 5 | 6 | ||
| Ⅰ | ON | ON | 5Lux |
| Ⅱ | - | ON | 15Lux |
| III | ON | - | 50Lux |
| Ⅳ | - | - | Disable* |
*Disable means the daylight sensor does not work. The sensor will turn on light once motion is detected regardless of ambient light level.
Stand-by Period
| 7 | 8 | ||
| Ⅰ | ON | ON | 0S |
| Ⅱ | - | ON | 30S |
| III | ON | - | 10min |
| Ⅳ | - | - | +∞ |
Applications:
gas station, etc
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.