LED Emergency Driver Power 1W Emergency Time 3h & Built-in Li-ion Battery KE002-01M180KB
LED Emergency Driver Power 1W Emergency Time 3h & Built-in Li-ion Battery KE002-01M180KB
1. Parameters
| Charge Part | Rated input voltage | 220-240Vac 50Hz /60Hz |
| Rated input current | 0.05A Max. @230Vac | |
| Input inrush current | 30A(twidth=100uS 50% Ipeak )@230Vac(Cold start at full load ) | |
| Power factor | ≥0.5@230Vac | |
| Input power | <3W | |
| Battery charging current | 150mA MAx | |
| Battery charging time | 24 hours MAx | |
| Emergency Part | Operating mode | Emergency mode |
| Load type | LED | |
| Emergency power | 1W | |
| Emergency time | 3 hours | |
| Load output current | 175-25mA | |
| Load output voltage | 6-50VDC | |
| Battery | Type | Li-ion:3.7V 2000mAh |
| Exception Driver Requirements | Surge current | N/A |
| Input current | N/A | |
| Output current | 1 A Max. | |
| LED Indication | Charging | Green light |
| Fault | Green light off | |
| Emergency Function Test | Manual test | Yes |
| Auto test | N/A | |
| Connect Control | Bluetooth | N/A |
| DALI | N/A | |
| Abnormal protection | Battery over-charge/deep discharge protection | Yes |
| Output over-voltage protection | Yes | |
| Output overload protection | Yes | |
| Output short circuit protection | Yes | |
|
Operating Environment |
Operating temperature/humidity | 0℃~50℃ humidity:20%-75%(without condensation) |
| Storage temperature/humidity | -5℃-35℃ | |
| Case Max. Temp(Tc) | 75℃ | |
|
Safety & EMC
|
Withstand voltage | 3000Vac 5mA 60S (Input “L N” – output “SEC+ SEC-) |
| Safety standard | EN61347-1, EN61347-2-7 | |
| EMC standard | EN55015, EN61000-3-2, EN61000-3-3 | |
| Battery standard | EN61233 | |
| Environmental protection requirements | Compliant to RoHS | |
| Certification | CE | |
| Others | Input/output(terminal/wiring) specification | Press terminal, wire diameter:0.5-0.75mm2 |
| IP rating | IP20 | |
| Type of protection | Class 2 | |
| Installation type | Built-in installation | |
| Installation dimension | 122*42*22mm | |
| Packaging requirement | White box+Instruction manual+clapboard+outer carton(K=A) | |
| Weight | 68g(driver),110g(battery) | |
| Lifespan | Emergency driver 30000h @Ta full load(driver not included) | |
|
Notes: |
||
2. Dimension (Unit:mm)
3. Wiring Diagram
4. Function
5. Wire Preparation
1)Solid or Stranded wire type 0.5 - 0.75mm2
2)To make or release the wire from the terminal, use a screwdriver to push down the button.
6. Manual Test & Operation Instructions
1) Connect the wire according to wiring diagram.
2) L,N power on, Switch on S1. then the load lamp turns on, the emergency driver indicator light will turns green, emergency power supply normal charging. Turn off Switch S1, the load lamp turns off.
3) Emergency Simulation: Switch on,the load lamp turns on, press the switch(TEST SWITCH), then switch to emergency mode, the indicator light of emergency driver will be extinguished. Release the switch(TEST SWITCH), then lamp is powered by led driver, the indicator light will turn on.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.